Ponds & Pumps

Submersible Utility Pump

40003 Available: 1
Submersible utility pump - ideal for removing unwanted water to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance.  Includes 8' power cord, and garden hose adapter. CSA certified.
InStoreClearanceButton 138x37 sku

Wayne 1/2 HP Utility Pump

44352 Available: 2
Wayne 1/2 HP PC4 Utility Pump  55832

Can be used to pump water from flooded basements, empty boats, drain stock tanks or water lawns and gardens. It can be used to boost line pressure by as much as 40 lbs. for power washing cars, sidewalks and more. An extra set of motor brushes and a suction strainer are included with each pump. Other features include: Solid, one-piece aluminum pump housing is lightweight and will not corrode, ball bearings are lubricated for life-never oiling, 3/4" brass hose adapters connect easily to garden hose, built-in carry handle for complete portability & thermoplastic impeller provides long service life.
ClearanceButton 138x37 sku

 Sump Pump Float Switch

44999 Available: 2
For sump & sewage pumps,Piggy-back design with 9 ft. cord,For pumps up to 1/2 HP,115 volt, 13 amp
ClearanceButton 138x37 sku

3/4 CP Well Pump

45178 Available: 2
JETS SOLD SEPARATELY. THREE YEAR WARRANTY - Features rubber gaskets, resilient rubber ring seals water housing against any leakage. Water housing has been improved with large channels, delivering more water volume at high pressure. The automatic pressure switch provides required household pressure by switching pump on and off automatically. Copper tubing provides for no corrosion or cracking. Priming port provides easy, convenient priming. The heavy duty motor is efficient and cool running with stainless steel shaft. Years of trouble-free operation. Overload protector is built into motor housing to protect internal windings. Water tight seal is a ceramic seal that is liquid lubricated for life. No oiling or repacking ever needed. Impeller i

Little Giant Submersible Utility Pump 1/6 HP 115V 1200 GPH

46215 Available: 3
Permanently lubricated utility pump includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pumps down to 1/8 in (3.2 mm). 1/6 HP thermally protected, shaded pole motor. Epoxy-coated cast aluminum housing. Bottom inlet has removable screen for easy cleaning.

 1/5HP Portable Electric Water Removal Pump

46820 Available: 2
Non-clogging vortex impeller,3/4" adjustable discharge,Top suction drains down to surface,Quick-disconnect 9 ft. power cord,No. VIP15 pumps 780 GPH at 10 ft.,No. VIP25 pumps 1020 GPH at 10 ft., 1/5 HP

 1/3HP Plastic Sump Pump

48557 Available: 2
Mechanical float switch,Fits 11" crock or smaller,Thermoplastic top & base,4-pole motor is overload protected,1-1/2" discharge,2500 GPH at 10 ft. lift,1-year warranty, 1/3 HP
ClearanceButton 138x37 sku

Little Giant Condensate Removal Pump 115 Volt

4028635 Available: 4
The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation. Fully Automatic, new generation float arm for enhanced reliability. Suitable for high-efficiency, gas-furnace condensate. 3 drain holes with 20ft. shut off head and 8.7 PSI. Capable of drawing 50 GPH @ 5ft.. Intermittent Liquid Temp. up to 120deg F. Little Giant Pump Company once again defines state-of-the-art in pump design. UL and CSA listed. 1-year limited warranty. Flow (GPH): 65 GPH with a 1 ft. rise, Volts: 115, HP: 1/60, Max. Total Head (ft.): 15, Max. Suction Lift (ft.): 5, Discharge Port (in.): 3/8, Volute: Glass-filled Flame Retardant Polypropylene, Impeller Shaft: Glass-filled Flame Retardant Polypropylene, Power Cord (ft.): 6, Thermal Overload Protection: Yes

Little Giant Submersible Pond Pump

4034435 Available: 3
Little Giant Submersible Pond Pump PE-2F-PW

Encapsulated epoxy filled pumps, energy efficient, corrosion resistant plastic housing with compact design. Environmentally safe and oil-less. 12.2 feet maximum lift and 1/4" MNPT discharge. 300 gallons per hour at 115v, 60Hz, 47W, 1/40 H.P. and 15' power cord. U.L./CSA listed.

C-2-PW Clamp

4038931 Available: 4
Ideal for reducing flow of statuary, waterfall, etc. Restricts tubing up to 1/2" I.D. For use in restricting flow on the discharge of a pump.

Little Giant Submersible Sump Pump 3/10 HP

4098208 Available: 3
Little Giant Sbmrsbl Smp Pmp-2760 GPH, 3/10 HP, 1 1/2" # 506158
For residential and light commercial use, the Model 6 Series manually operated sump pump provides efficient and reliable service. Pump feature a
1/2in. discharge with a maximum lift of 18ft.. Polycarbonate cover and polypropylene volute-base. UL and CSA listed. 1-year limited warranty. Flow (GPH): 2,760, Volts: 115, HP: 3/10, Max. Total Head (ft.): 17.3, Max. Suction Lift (ft.): 18, Discharge Port (in.): 1 1/2, Pump Housing: Cast
Housing with Protective Epoxy Coating for Corrosion Resistance, Volute: Nylon, Impeller Shaft: Nylon, Power Cord (ft.): 8, Thermal Overload Protection: Yes
NOTE: Due to the weight and or size of these items, we can only ship
via UPS ground service. Please select ONLY this shipping option.to expedite delivery.

Submersible Statuary Pump 70GPH

4172656 Available: 12
Little Giant Statuary Fountain Pump -  PES-80-PW

Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 3.5 feet maximum lift and discharge adapters for 1/2" or 3/8" I.D. tubing. 8 watts. 70 gallons per hour at 115V, 60Hz. 6' power cord. 3"H x 2.3"L x 1.6W. U.L. Listed.