Corded & Pneumatic Power Tools

Festool HL 850 E Imperial Planer

M6011710 Available: 1
Using an electric planer right up to the edge or on rabbets often produces unsatisfactory results, as the machine leaves a lip that has to be removed by hand0unless you have the Festool HL 850 planer. The HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet. Because the planer head is mounted to one side, it sits flush with the opposite side of the planer housing. The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases. Planing up to the edge in deep rabbets is no longer a problem. Single knife cutter-head with spiral design with replaceable cutting knife for a smooth, quiet and "chatter-free" cut. Multiple head options to create rustic architectural effects in beams and flooring. Unlimited rabbeting depth with flush cutter side design and retractable spring-loaded guard. Rotary handle depth adjustment allows precise depth setting to 1/256" (1/10 mm) up to 9/64" (3.5 mm).
$680.00 Regular Choose Options OUT OF STOCK

Festool CT 36E AC Dust Extractor

M6011900 Available: 2
The CT 36 E AC has an autoclean feature especially equipped for the Festool Planex LHS 225 Drywall Sander. Sanders are known for creating a lot of dust very quickly. So the filters with normal dust extractors would clog creating excessive dust build-up and minimum suction. With this Festool dust extractor, there is an automatic cleaning of the filter as you continue to work so there are no interruptions. Its ability to circulate huge amounts of suction for the dust and the continued use of the filter without any interruptions is time and money-saving. The CT 36 E AC includes an ultra-light weight, flexible hose for use with the Planex Drywall sander and other tools that accept a 36mm hose. The low center of gravity, integrated center handle, and extra large wheels make navigating rough terrain in the shop or jobsite easy without tipping over. Festool offers a comprehensive three-year limited warranty and ensures the highest level of quality for all of their power tools. Features: New Smooth tapered suction hose New and improved SYS-Dock Hose Garage New cord holder Tool triggered or manual on-off switch with smooth start up and shut off delay Replaceable Filter Bag Integrated cleaning device cleans the filter quickly Stepless electronic suction control Wet and dry extraction without complicated changeover Integrated storage Blower port Antistatic equipment protects from electrostatic charging Flat area for tools or systainer stacking Locking rear brakes Specifications: Container Capacity: 9.5 gal Dimensions (L X W X H) 24.8" x 14.4" x 23.4" (630 x 365 x 596mm) Filter Bag Capacity 8.9 gal Maximum Suction Force 137 CFM (3,900 l/min) Noise Level: 62-72 db(A) Power Consumption 350-1,200 watts/2.9-10 amps, 120v AC Static Water Lift 96" (24,000 Pa) Weight: 29.8lbs. (13 kg) Includes: CT 36 E AC Dust Extractor Filter Self-Cleaning Filter Bag Cord Wrap Hose Garage 36mm Antistatic Suction Hose, 1(36mm) x 11.5'(3.5M)
$915.00 Regular Choose Options OUT OF STOCK

Festool CT 26E HEPA Dust Extractor

M6011902 Available: 3
The Festool CT 26 E Dust Extractor incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec(R)) unit is mobile, with a durable chassis, large low abrasion rear tires, and double swivel casters up front to easily negotiate obstacles. The CT 26 E dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self-cleaning. The bag inflates and deflates with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all, Festool dust extractors, the CT 26 E utilizes the SYS-Dock system that facilitates the use/storage of one or more T-LOC or classic systainer(R) to the top of the unit. Works wet or dry with no complex conversion, and is extremely quiet.

Includes: CT 26 E - 6.9 Gallon HEPA Mobile Dust Extractor, HEPA Filter, (1) Fitted Filter Bag and (1) 1 1/16" x 11.5' Antistatic Suction Hose.
$730.00 Regular Choose Options OUT OF STOCK

Festool CT 36E HEPA Dust Extractor

M6011903 Available: 1
Compact but large. Light but powerful. Whether it's used on the construction site or in the workshop, thanks to its huge container capacity of 36 l, the CT 36 provides maximum volume with compact dimensions. Equipped with swiveling castor wheels and rear wheels for optimum mobility. It also has a locking brake that provides stability on any surface as well as during transport. The flat filter fully integrated in the suction head ensures the full volume is utilized: This means that the gross and net container volumes are virtually identical. The extremely compact high-performance turbine provides the right suction power. A 137 CFM (3900 l/min) volume flow means that nothing remains except clean air. Carries Full Unit HEPA
Maximum utilization of the container volume the gross volume is the same as the net volume. Can be individually retrofitted with an additional socket, compressed air or Bluetooth module for remote control on the suction hose or automatic start via the Bluetooth battery pack. Constantly high suction because of the compact high performance turbine -Smooth suction hose and optimized SYS-Dock with cord holder and T-LOC function for conveniently connecting SYSTAINERs to the mobile dust
extractor. Antistatic function prevents static developing during work. Attachment of Systainers via SYS-Dock. Hose garage and cable windup for greater tidiness and safety. Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container. Container/filter bag capacity 36/34 l
$790.00 Regular Choose Options OUT OF STOCK

Festool OF 1400 EQ Imperial Router

M6012135 Available: 3
The OF 1400 Router provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1/2", 1/4" or 8 mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable, the OF 1400 is the one router every tradesperson should own. With a category-leading 2 3/4" plunge depth, precise to 1/256" (1/10 mm), this router gives you the power, precision, depth of cut, and dust extraction capabilities that will simplify your routing tasks. This is the new imperial version of this tool. It is identical to the previous version with the exception of the units on the depth scale. Ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips. The OF 1400 EQ Router provides a smooth 2-3/4" plunge action on precision ground rods and a double column clamp with a quick and secure plunge lock. Micro-adjustable depth control to 1/256" (1/10 mm) with ball detents which allows you to dial in your routing with tremendous precision. MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection.
$600.00 Regular Choose Options OUT OF STOCK

Festool Planex Long-Reach Sander LHSE225

M6012200 Available: 1
Simplify the drywall sanding experience with the Planex easy Drywall Sander. This single-piece machine features easy plug-in and go design this is both easy to set up and easy to use. Intuitive controls combine with exceptional balance and low weight to make the task of drywall sanding easier than ever. Enjoy greater freedom-of-movement and longevity with the direct-drive EC TEC brushless motor with its motor-over-pad design and flexible head joint. There are no flexible drive cables and no carbon brushes on the motor which need replaced. Removable top section allows for up-close sanding to abutting surfaces such as inside edges. Reduce jobsite clean-up while working in a cleaner environment thanks to the integrated dust extraction design that captures dust at the surface (when attached to an appropriate dust extractor). Fully compatible with existing Planex abrasives. Simple set-up and intuitive controls let you focus on results. Low weight and perfect balance reduce fatigue. Direct-drive EC TEC brushless motor provides power to the surface without a flexible cable for less downtime with less weight. Flexible head design allows greater freedom-of-movement for easier sanding. Covered by Festool exclusive 3-year Service All-Inclusive warranty. Uses same Granat abrasives as the classic Planex Drywall Sander.
$750.00 Regular Choose Options OUT OF STOCK

Festool Track Saw TS75 EQ F Plus

M6012222 Available: 2
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back. When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor. Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
$660.00 Regular Choose Options OUT OF STOCK

Festool OF 2200 EB Router

M6014689 Available: 2
A serious router for serious router needs. The OF 2200 is the most powerful router available from Festool. It can easily plunge into 8/4 hard maple and make a 1/2 -Inch groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop. Although large and powerful, the OF 2200 is silky smooth and easy to control. The OF 2200 is designed with two angled handles that are ergonomically correct for not just the hand, but also for the body. The angled handles are set to reduce fatigue and strain for maximum control. One handle is equipped with finger-tip controls for the lockable power switch. The other handle has a rotary locking knob which applies a lock to both columns for an extremely rigid and secure depth setting without deflection between the router motor and the base. An industry-first concept; the OF 2200 has a multiple base plate system that can be changed out without tools. This system expands the utility of the router allowing you to quickly switch between accessory application-specific plates. A special, 4 position depth stop turret provides incremental steps to plow through the deepest routing tasks with a unique and lockable fourth step with a 2 mm offset for making a finish pass at full speed for incredibly smooth cuts. A micro-adjustable depth control features 1/256-Inch (1/10 mm) depth control with ball bearing detents for precise depth control. The ratcheting spindle lock makes bit changes quick and easy. Simply select the lock or unlock position, place the wrench on the spindle and rotate. A full 360-Degree dust shroud pops into place with a push of a button for maximum extraction efficiency. A single rotary knob lock system for attaching accessory guides is quick and secure. Made in Germany.
$970.00 Regular Choose Options OUT OF STOCK

Makita 16" Circular Saw

M6021678 Available: 2
Electric brake for maximum productivity, low noise level at only 87dB for quiet operation, blade stabilizer for stable blade rotation and cutting performance, depth control lever for convenience and secure adjustments, large support handle for increased operator comfort and control, carbide tipped blade. Specs: 15.0 AMP, 16-5/16" blade diameter, 1" arbor, max cutting capacity: 90 degrees- 6-1/4", 45 degrees-4-3/16", no load 2,200RPM, 1,800 watts out, 24-1/4" long, weighs 32.1bs. Includes: (1) 32 tooth carbide tipped blade, #6 hex wrench, rip fence.
$749.99 Regular Choose Options OUT OF STOCK