Festool DOMINO Connector Set

M6011353 Available: 2
32 Anchor Bolts SV-AB D14, 16 Connector Double Bolts SV-DB D14, 128 Half-Shells for the Anchor Bolts and Connector Double Bolts, 32 Expansion Anchors SV-SA D14, 64 transverse anchors SV-QA D14 including studs, hex wrench 4 mm for tightening screws, 64 Half-Shells SV-V D14 for widening 32 cross anchors, 32 cover caps each in silver, dark brown and light brown (SV-AK D14 slr, SV-AK D14 brn1 and SV-AK D14 brn2), 32 DOMINO Tenons D14x75 beech. Break through the limits of shop-built pieces and on-site construction with the use of knock-down hardware. Create, build, and finish full-sized constructed pieces, then quickly disassemble, move, and then reassemble with only a hex wrench. Domino fasteners work with the Domino XL (DF 700) Joiner to create flat or corner joints. Corner and flat connectors provide simple and quick connections without the need for templates or complex measuring. Colored cover caps provide high-quality corner connection appearance. Available as a set and individual components. Requires 14mm cutter. Includes corner connectors and flat connectors incl. cover caps and DOMINO wooden dowels. Required accessories: DOMINO cutter D 14 (497871)
$270.00 Regular Choose Options OUT OF STOCK

Festool Domino DF500 Connector Set

M6012225 Available: 2
The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications 0 from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.

The Domino DF 500 Connector Assortment Systainer offers the best value to get you started with the system.

For use in materials with a minimum thickness of 3/4" (18mm).

Because of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture in the workshop as well as with the customer. All joints are simple and quick to machine using the DOMINO DF 500 joiner. No additional special machine is required. The connectors' large tightening surface and long bolts make furniture assembly significantly easier. Cupboard assembly is therefore no problem, and you can do it easily on your own. The clever DOMINO system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary. For working efficiently and quickly. The new Domino basic structure connectors and furniture connectors can be positioned simply and universally 0 in combination with DOMINO or a series of holes.

(70) Domino/Domino KV D8 basic structure connector
(20) Domino/LR32 KV-LR32 D8 basic structure connector
(10) Domino/Domino MSV D8 center panel connector
(10) Domino/LR32 MSV-LR32 D8 center panel connector
(50) Dark brown cover caps
(50) Silver cover caps
(50) White cover caps
(50) Grey cover caps
(20) Domino D 8 x 36 mm
(1) BS-KV D15 drill template, 203164
(1) KVB-HW D15 CE hinge location cutter, 203165
(1) Screwdriver
(1) Systainer SYS 1 T-LOC
$375.00 Regular Choose Options OUT OF STOCK

Woodpeckers Single Offset Super Fence 36"

M6201106 Available: 1
Now you can have a router fence that's not only a high quality American made tool but also designed to help woodworkers with all woodworking operations from roundovers, raised panel doors and precision edge jointing.

One of the most innovative features of the Woodpeckers Super Fence is its micro-adjustable offset capabilities. This goes way beyond simple shims normally found with router fences. With this offset capabilities you can set an offset of any amount up to 1/4".

To make the offset even easier to use, the two fence halves automatically line up perfectly parallel when tightened down.
And of course it has a dust collection port to fit 2-1/4 and 2-1/2" hose, variable throat capabilities to handle router bits up to 4" in diameter and multiple T-Slots on every surface.

The Super Fence not only makes it easier to attach feather boards and sub-fences than any other router fence, it also is the first one to allow for the exact position of feather boards regardless of the thickness of the sub-fence.

The fence is nearly 4" tall and 5" deep with heavier than usual wall thickness for optimum support of demanding router functions.
The Super Fence can attach directly to slots spaced 17" apart from center to center. (Max table length is 36" for use with the clamps. No table size limit if mounting to slots.).
$239.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Paralle Guide System with T-Track

M5085454 Available: Not Available - Out of Stock
The Seneca Woodworking Parallel Guide System is a set of precision machined aluminum components that mount to your track saw guide rail and enable the making of consistent sized repetitive rip cuts.  The Parallel Guide System acts as a rip fence / rip guide for your track saw, multiplying the speed at which panels can be cut to size with speed and precision.  This system works with both Festool and Makita brand track saws.
To make a cut, simply set both stops to the width of the piece you want to cut,  locate your guide rail on top of your workpiece using the stops as a reference then make your cut.
The Parallel Guide System uses Incra T-Track Plus as one of its major components. This allows you to expand the system if you need more cutting capacity.   We include two 24" lengths of Incra T-Track Plus with the system, which allows roughly 31" of cutting capacity with the system, but this this can be expanded by swapping the 24" T-Track Plus for longer lengths.
All three main components of the system are precision machined from aluminum and anodized black.  The Slider Mount adapters are un-anodized.

Included in this set:
-Two (2) Rail Brackets (for attaching Incra T-Track Plus to the Festool or Makita guide rail)
-Two (2) Adjustable Rail Stops
-Two (2) Interlocking Narrow Stops (adjustable from top of Incra T-Track) -Two (2) machined "slider mount" adapters for attaching the Narrow stops to the T-Track
-Two (2) 24" Incra T-Track Plus (allows cuts of up to 31" width)
-all necessary knobs and hardware
$224.95 Regular Choose Options OUT OF STOCK