Woodworking

K4 Pocket Hole Jig Kit

2214518 Available: 3
Includes everything needed to get started with -,Kreg joinery (TM),Kit allows you to drill pocket-holes at problem-,joint then drive self-tapping screws to secure,Includes: Kreg Jig(R), spacer block, stepped -,drill bit, 6" square driver, starter screw set,-,starter plug set, Skillbuilder(TM) DVD & quick-,start guide
$99.99 Regular Choose Options OUT OF STOCK

Accu-Cut Cutting Guide

2609816 Available: 1
This Kreg Accu-Cut(TM) Circular Saw Guide Track System will produce results that exceed your expectations. This system rips, crosscuts and makes angled cuts up to 48" long in plywood, MDF, and other large panels. Transforms your circular saw into a high-performance, track-guided cutting system. Anti-slip/anti-chip strips hold the track securely in place without clamps while cutting, and the strips provide material support along the cut to prevent splintering of fragile plywood veneers.
$79.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Cutter Adapter for DF700

M5085805 Available: 2
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700.  This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500.   This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth.
$69.99 Regular Choose Options OUT OF STOCK

Festool DOMINO Connector Anchor Bolt/32

M6011327 Available: 2
32 Anchor Bolts for corner connections, including 64 Half-Shells. Break through the limits of shop-built pieces and on-site construction with the use of knock-down hardware. Create, build, and finish full-sized constructed pieces, then quickly disassemble, move, and then reassemble with only a hex wrench. Domino fasteners work with the Domino XL (DF 700) Joiner to create flat or corner joints. Corner and flat connectors provide simple and quick connections without the need for templates or complex measuring. Colored cover caps provide high-quality corner connection appearance. Available as a set and individual components. Requires 14mm cutter. For frame and rack joints at material thicknesses of 1-3/16" (30 mm) or higher.
$53.00 Regular Choose Options OUT OF STOCK

Kreg KJMICRODGB Jig Micro Pocket Drill Guide System

M6072615 Available: 3
-Micro pocket drill guide works in both the K3 and K4
-Kreg Jig bench top base features black color to differentiate from standard drill guide
-Reduced width lets you drill two holes across extremely narrow stock down to 1
-Wide screw heads seat well below material surface in thin stock
-Perfect for creating fully pluggable pocket-holes in 1/2" thick material
$54.99 Regular Choose Options OUT OF STOCK

Sona Hand Held Metal Detector

M6080101 Available: 2
-Overall dimensions: 16" x 3-1/2" x 1-1/2"
-360-degree Detection area sensor
-LED indications; Audio tone changes per metal size
-[Low/On] Momentary button (helps save battery)
-3.5mm Headphone jack for noisy environments
$39.97 Regular $59.99 Choose Options OUT OF STOCK
ClearanceButton 138x37 sku

Arbortech Power Chisel Starter Kit 5 Piece

M6140501 Available: 1
The Power Chisel is the ultimate woodworker's sidekick. You simply let the motor do the work and guide the chisel in whichever direction you prefer. The Power Chisel does everything that a traditional hammer and chisel will, only easier and faster. The Power Chisel is so safe and easy to use that it is suitable for anyone to use, from kids to the professional woodworker.

This purchase includes:

CHISEL 2 * 1 x 8mm 60? Angle "V" Chisel

CHISEL 6 * 7 mm Gouge Chisel No. 1 1 Sweep
CHISEL 11 *7 mm Gouge Chisel No. 8 Sweep

CHISEL 12 * 20 mm Gouge Chisel No. 9 Sweep

CHISEL 13 *18mm 90? "V" Chisel
$99.99 Regular Choose Options OUT OF STOCK

Arbortech Power Chisel Woodcarver Kit 3 Piece

M6140502 Available: 2
The Power Chisel is the ultimate woodworker's sidekick. You simply let the motor do the work and guide the chisel in whichever direction you prefer. The Power Chisel does everything that a traditional hammer and chisel will, only easier and faster. The Power Chisel is so safe and easy to use that it is suitable for anyone to use, from kids to the professional woodworker.

This purchase includes:

1 x 9x20 Gouge Sweep No. 9
1 x 8x7 Gouge Sweep No. 8
1 x 18x90 deg Vee Gouge Sweep No. 90 deg
$79.99 Regular Choose Options OUT OF STOCK

Arbortech Contour Random Sander

M6140514 Available: 2
Moulds to shape for effective sanding of shaped and sculpted forms. Powerful random sanding action. Does not burn or dig in at edges. Fits to any standard angle grinder. Made by Arbortech.
$79.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking DF500 Domiplate 1/2 in., 3/4 in.

M5085806 Available: Not Available - Out of Stock
The Seneca Woodworking Domiplate is a fixed fence solution designed for the Festool Domino DF 500  mortising tool.  It allows quick adjustment for the repeatable mortising of 1/2" or  3/4" nominal plywood simply by turning the plate over.  The Domiplate is a fixed fence that eliminates the possibility of fence drift, saving time and money due to misaligned mortises. The Domiplate comes with two captive screws and a textured ball knob for a secure, comfortable grip during use. Made of aircraft grade aluminum. Hard coat anodized and laser engraved with size markings.
$64.95 Regular Choose Options OUT OF STOCK

MFT Layout and Assembly Square

M6080900 Available: Available for Pre-Order Only
PRE-ORDER ONLY BY JAN 29, 2018

The MFT Layout & Assembly Square is part of Woodpeckers OneTIME Tool program and is only made to order. Deadline to order yours is Monday, January 29, 2018. Once the deadline passes and orders are filled, this product will be retired from our product line. Delivery is scheduled for May, 2018. Thanks for considering Woodpeckers American made tools.

Woodpeckers newest OneTime Tool, the MFT Layout & Assembly Square enables quick and accurate setup of your Festool MFT table and enhances layout and assembly tasks. Specifically designed for setting perpendicularity between the Festool MFT fence and guide, the added MFT Positioning Dogs ensure alignment of your MFT rail or fence with the dog holes; inline or at 45?. Woodpeckers Precision and Quality. The backbone of the MFT Layout & Assembly Square is a meticulously machined piece of nearly indestructible phenolic. The single piece construction means there are no parts to become misaligned and the slots enable secure clamping of your workpiece and also double as a convenient handle.
Shop Versatility. In addition to taming your MFT table, the versatility of the Woodpeckers MFT Layout and Assembly Square makes it a valuable addition throughout your shop. It is keenly adept at keeping large panels held firmly in place; ensuring perpendicularity during dry fits and glue ups on cabinetry and other large projects.
It excels at setting 45?and 90?angles on your table or miter saw. If you have an 18" bandsaw, you can square the table to the blade with the square standing upright on its  3/4 " wide leg, leaving your hands free to adjust and set stops. And wood glue is a breeze to clean off the phenolic surface, wet or dry. When not in use, the large clamping slots keep it hanging conveniently nearby on your shop wall.

And being machined from a single slab of American made phenolic, this tool is virtually indestructible. Drop it, hit it or soak it in water and it'll still be rock solid and perfectly accurate
$69.99 Regular Choose Options OUT OF STOCK

Arbortech Woodcarver Pro Kit

M6140521 Available: Not Available - Out of Stock
The Pro-4 Woodcarver is an affordable woodworking blade that is suitable for rotary woodcarving. Designed and manufactured in Australia from the highest quality hardened steel, the Pro-4 Woodcarver blade will shape any soft wood smoothly and efficiently with great control.

-Freehand Power Carving in soft to medium wood
-Low cost alternative for shaping soft to medium wood
-Rough shaping and trenching
-Safety rakers for less kickback
-Medium to large projects
-Chip-limited teeth
-Fast wood removal in sculpting (busts, chairs, rocking horses, etc.)
$69.99 Regular Choose Options OUT OF STOCK