Woodworking

General Tools Revolving Turret Jig Doweling 840

21783 Available: 2
Unique revolving turret design is extremely accurate and simple to use for end to end, edge to edge or edge to end doweling. Accepts 6 sizes of twist bits: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2". Guide bars are graduated for fast positioning of hole center. Used to making fast, accurate dowel holes in furniture and other carpentry applications. Includes: three (3) brad point drill bits: 1/4", 5/16" and 3/8", 30 dowel pins: ten (10) of each 1/4", 5/16" and 3/8", (3) three drill stops: 1/4", 5/16" and 3/8, (6) six dowel centers (2) two each: 1/4, 5/16" and 3/8", 1 hex wrench, craft glue.
$36.99 Regular Choose Options OUT OF STOCK

Kreg Pocket Hole Jig Jr. R3

2214450 Available: 5
Features two independent positioning sliders, nine individual depth settings, two wood chip relief holes, and hardened steel drill guides. 7/8" drill guide spacing. Works with with a wide variety of clamps. Face Clamp for clamp pad adapter. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8" and 1-1/2" screw centering ability. Kit contains Kreg Jig Jr., clamp adapter, stepped drill bit, 6" driver bit, depth collar, allen wrench, starter screw set, instruction manual, and carrying case.
$33.99 Regular Choose Options OUT OF STOCK

King Arthur Tools Lancelot Blade 5/8"x 14T

2237899 Available: 2
Lancelot 14 Tooth Chain Saw Blade for Grinders - 5/8" arbor
The 14 tooth Lancelot chain saw cutter fits most 4 1/2" (115mm) and 125mm European angle grinders.  5/8"(16mm) center hole.  More aggressive than the 22 tooth and leaves a coarser finish but you'll be amazed at the smooth finish. NOTE: Only 5/8" (16mm)  center hole blades may be tandem mounted. Excellent for rapid wood removal, cutting and general shaping.
Lancelot and Squire are used on disc or angle grinders as individual blades and may also be used in tandem combinations with the addition of our Universal Nut.
All the saw chain cutters feature a full house design - which means the chain circlet consists of consecutive left and right teeth - the teeth are not seperated by skip links common to standard chain saw.  All the blades have twice the amount of regular teeth, resulting in the blade powering its way through the hardest of woods and other soft non-ferrous materials.
This
important feature, combined speed of the angle grinder rotating at between 10,000 to 13,000 rpm's provides users with most effcient and powerful cutting and shaping tool accessory in the world.  Should the blade hit a nail or piece of wire in the wood, on most occasions it will cut through
the
obstruction.  If not, the impact will cause the chain to stop while the discs rotate giving the user a waring to stop the angle grinder.  This is a major safety feature which virtually eliminates kickback and binding.
All the chains are easily sharpened with a 5/32" chain saw file.
Fits most popular angle grinders including - Bosch - B&D - Craftsman - Dewalt - Fein - Hitachi - Milwaukee - Porter Cable
Safety & Assembly Instructions
Do NOT use Lancelot or Squire on any Makita brand grinders. We only recommend use of 4-1/2" (115mm) angle grinders with a constant pressure switch (paddle, kill or dead man switch).
DO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD
   1. Your work piece is secured in a work bench, vise or manner that insures it is safe to cut.
   2. You're wearing protective safety clothing and all instructions for
the
assembly of our tools have been faithfully carried out!
   3. You will see constant references to Lancelot, however, you can assume the same principles apply to Squire should you use Squire on its own.
   4. I'm going to refer to wood as the object being cut, however, if your subject is ice, bonsai trees, rubber or any other soft non-ferrous materials, the cutting techniques are the same.
   5. The depth of cut on Lancelot is 1-3/16", Squire is 11/16".
   6. These tips are written for right hand use carving simply because our tools fit right hand angle grinders. The standard hand position is to lightly but firmly grip the auxiliary handle with your left hand and the body of the grinder with your right. There's no need to use a vise grip and make your knuckles go white with the pressure - you'll exert much easier control with a firm relaxed grip.
$49.99 Regular Choose Options OUT OF STOCK

King Arthur Tools Lancelot Blade 5/8"x 22T

2237956 Available: 2
-Teeth are easily sharpened with 5/32-inch round file
-Fits most 4" (100mm), 4-1/2" (115mm) and European 125mm disc/angle
grinders
-Cuts the hardest woods in any direction
-Great for mass removal of wood
-Sculpts, channels, hollows, and cuts curves
$49.99 Regular Choose Options OUT OF STOCK

General Tools EZ Dowel Kit 841

2399178 Available: 2
Our E-Z Dowel Kit includes everything you need to make beautiful wood joints like a pro! The heavy duty aluminum jig effectively simplifies the doweling process, allowing you to create Edge-to-Edge, Right Angle and Edge-to-Surface joints with little effort. The kit also includes three Brad Point drill bits and drill stops, as well as dowel center pins and a collection of wood dowels. Instructions included.
$37.99 Regular Choose Options OUT OF STOCK

Kreg System K5 Organizer

2439222 Available: 1
The ideal way to store and organize an entire Kreg Joinery system in one compact, convenient case. The case holds your Kreg Jig, plus accessories like clamps, bits, drill guide blocks, screws and more. Custom inserts organize and protect contents, making it easier than ever to keep everything needed close at hand.
$24.97 Regular $39.99 Choose Options OUT OF STOCK
ClearanceButton 138x37 sku

Kreg Zinc Pocket Hole Screws 1", #8 Coarse, Washer-Head, 1200 Count

M1075653 Available: 2
Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. At first glance, a Kreg screw might not look much different from other wood screws. But don't be fooled: there's a lot of serious engineering built into them. Compare a Kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the Kreg screw has unique features that those other screws don't. Every one of those features is there to ensure that you get the best results possible.

-Self-tapping tip
-Case hardened Steel
-Square drive
-Flat-bottom head
-Smooth shank
-1200 count
$39.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Domi-Shim for DF700

M5085803 Available: 3
The Seneca Woodworking  Domi-Shim is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all the way to the cutter centerline, allowing centering on material thinner than the Domino XL fence's  lower travel limit would previously allow.   This shim can be used with the Domino XL in several ways:
-By itself, using a rule or setup block to adjust the fence to achieve the proper offset for a variety of material thicknesses, both imperial or metric.
-By itself with the Domino XL fence offset gauge set to "15mm." This creates the correct offset for centering a mortise on 1/2" nominal plywood.
-The Domi-Shim is machined from aluminum, black anodized and laser-engraved. Mounting hardware is included.
$36.99 Regular Choose Options OUT OF STOCK

Festool Domino Connector Cross Anchor/32

M6011325 Available: 3
Domino Connector Cross Anchor/32
$37.00 Regular Choose Options OUT OF STOCK

Festool DOMINO Connector Expansion Anchor

M6011326 Available: 2
DOMINO Connector Expansion Ancho
$37.00 Regular Choose Options OUT OF STOCK

Festool Domino Double Head Bolt

M6011345 Available: 1
16 double-headed bolts for flat connections, including 64 Half-Shells. The double-headed bolts can be clipped using 2 Half-Shells or (as shown) with 4 Half-Shells 0 depending on the required alignment. Break through the limits of shop-built pieces and on-site construction with the use of knock-down hardware. Create, build, and finish full-sized constructed pieces, then quickly disassemble, move, and then reassemble with only a hex wrench. DOMINO fasteners work with the DOMINO XL (DF 700) Joiner to create flat or corner joints. Corner and flat connectors provide simple and quick connections without the need for templates or complex measuring. Colored cover caps provide high-quality corner connection appearance. Available as a set and individual components. Requires 14mm cutter. For processing using the DOMINO XL DF 700 joining machine. In conjunction with 2x SV-QA D14 cross anchors (and optional SV-V D14 widening clips for soft materials) for creating flat connections in furniture manufacturing.
$37.00 Regular Choose Options OUT OF STOCK

Festool DOMINO D14x75 104 Pack

M6012144 Available: 2
The D14x75 dowels are ideally suited to the corner connector system. They provide further load transfer in addition to the connectors. The corner and flat connector system for the DOMINO XL DF 700 joining machine enables stable connections that can be separated again at a material thickness of 30 mm or higher. For frame and rack joints (corner connectors) and board connections (flat connectors) that will impress you with extreme precision and stability as well as maximum flexibility and unique efficiency.
$47.00 Regular Choose Options OUT OF STOCK