Circular Saw Blades

Tenryu Carbide Tipped Saw Blade 40T 8-1/4"

M6099735 Available: 1
8-1/4" 40T Power Tool Series Blade

8-1/4" Blade - 40 tooth - .079" Kerf - 15 degree rake

ATB - Alternate Top Bevel.  Typical for cross grain.  Also used on ripping blades.
The tremendously popular 8-1/4" Power Tool Series blade. For table or portable saws
Exceptional features and superior quality, Thin Kerf
TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.
BLADE FEATURES:
    * Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
    * High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
    * Aggressive rake angles for maximum cutting speed and efficiency.
    * Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
    * Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
    * Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
    * Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
    * Can be resharpened for extended blade life.
$29.99 Regular Choose Options OUT OF STOCK

Tenryu Sawblade 36T 5-1/2"

M6099741 Available: 1
For fine and easy trim work on Makita or Skil circular saws
High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life
Aggressive rake angles for maximum cutting speed and efficiency
Thin kerf for less waste and lighter cutting performance
$29.99 Regular Choose Options OUT OF STOCK

Tenryu Carbide Tipped Saw Blade 60T 6-1/2"

M6099746 Available: 1
Specifications - Arbor: 5/8in Grind: ATB Rake: 0 Kerf: 0.079 RPM: 2600 Type of Machine: Corldess trim Type of Material: Non Ferrous
$39.99 Regular Choose Options OUT OF STOCK

Tenryu SL-16552C Saw Blade 6-1/2"

M6099751 Available: 1
Tenryu Silencer, ULTIMATE TRIM SL-16552C. 6-1/2" Dia., 52 Teeth, 5/8" Arbor, ATAF Grind, .063" Kerf, 18 Degree Rake. Cordless Circular Saw. Silencer Body: Laser cut, resin filled slots for less noise and less vibration. PTFE coated plate: Reduces pitch build up and lowers resistance. Great for finish carpentry with trim saws Tenryu puts a great deal of care in manufacturing their saw blades to ensure every blade is of the highest quality. See our article on making Tenryu Saw blades.
$39.99 Regular Choose Options OUT OF STOCK

Tenryu Saw Blade 48T 6" SL-15248C

M6099752 Available: 1
Specifications - Arbor: 1/2in Grind: ATAF Rake: 15 Kerf: 0.063 RPM: 9500 Type of Machine: Corded Trim Type of Material: Wood
$37.99 Regular Choose Options OUT OF STOCK

Tenryu Saw Blade 42T 5-1/2"

M6099758 Available: 1
Specifications - Arbor: 5/8in-1/2in Grind: ATAF Rake: 15 Kerf: 0.063 RPM: 10800 Type of Machine: Corded Trim Type of Material: Wood
$29.99 Regular Choose Options OUT OF STOCK

Tenryu Ferrous Blade 7-1/4" PRF-18556CB

M6099788 Available: 2
7-1/4" 56T Steel Pro Series Saw Blade

7-1/4" - 56 tooth - .071" kerf -  -10 degree rake

Additional carbide tip for smoother cutting of thin materials.
TENRYU's steel cutting carbide tipped saw blades for industrial performance Cut ferrous metals (mild steel) faster, cleaner and easier. Save time, money, the environment, and your respiratory health
TENRYU's complete series of steel cutting saw blades called "Steel-Pro0" makes light work out of all kinds of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod and much, much more.
Specially formulated C-6 carbide grade, combined with our unique tip design, resists breakage on impact and lasts longer- much longer than standard carbides or abrasive discs. Special tooth geometry with "inserted" tooth design greatly improves security of the tip, efficiency and durability. Abrasive discs throw sparks and lots of dust including unhealthful fiberglass. You shouldn't be breathing it in! Steel-Pro0 blades reduce spark production and eliminate abrasive wheel dust.
Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro0 blades allow you to keep working; eliminating down time for frequent blade changes. In addition, Steel-Pro0 cuts 5 to 10 times faster than abrasives. Typically, one Steel-Pro0 blade will outlast somewhere between 15 to 30 abrasive blades. Think of all that non-productive "down time".
Abrasive discs leave a sharp burr at the cutting edge that must be removed later. Steel-Pro0 blades cut clean; eliminating this extremely time-consuming after-cut process. "Time is money". Steel-Pro0 saves BOTH! EACH BLADE FEATURES:
    * Rugged plates and specially formulated carbide tips with a special tooth grind for fast, clean cuts.
    * High quality cuts without the clouds of dust and scorch marks associated with friction blades.
    * Cool cuts that leave the work piece edge free of burrs.
    * Reduced cost-per-cut and maximized performance for the operator as a result of fewer blade changes.
$49.99 Regular Choose Options OUT OF STOCK

Tenryu Ferrous Blade 7-1/4" PRF18548BW

M6099792 Available: 2
Specifications - Arbor: 5/8in Grind: KO ATB Rake: 0 Kerf: 0.079 RPM: 5800 Type of Machine: Circular Saw Type of Material: Ferrous
$49.99 Regular Choose Options OUT OF STOCK

Tenryu Non-Ferrous Metal Alumi-Cut Circular Saw Blade 60T 7-1/4"

M6099797 Available: 2
The very popular 7-1/4" Alumi-Cut blade for non-ferrous metal.Also works in plastic.
TENRYU'S best value for your non-ferrous metal cutting needs. Thin Kerf. Very Economical.
The Alumi-Cut Series offers true quality and affordability.
These blades are available in a wide variety of sizes to fit most popular job site and shop saws. Excellent results in aluminum, copper, brass, bronze and other non-ferrous metals. Even works well in many plastics. Also good for woodworking and plastic cutting when needed. Resharpenable for long life, the Alumi-Cut blades will help you improve your bottom line!
These blades are also an excellent choice for cutting laminated flooring (i.e.: PergoR, etc.) with slide-miters or table saws.
EACH BLADE FEATURES:
    * Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
    * Appropriate triple-chip grind pattern for non-ferrous metals.
    * Quality carbide ground to precision.
$49.99 Regular Choose Options OUT OF STOCK

Tenryu Saw Blade 36T 4-1/2" Trim

M59059 Available: Out of stock
For clean and easy trim work on the Porter Cable trim saw
High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life
Aggressive rake angles for maximum cutting speed and efficiency
Thin kerf for less waste and lighter cutting performance
$29.99 Regular Choose Options OUT OF STOCK