Levels & Measuring Tools

Woodpeckers 641I Precision Woodworking Square (Inch Scale)

M6201100 Available: 2
Unmatched Precision and Finest Quality Materials. The squares start the manufacturing process as a solid piece of very expensive, extremely stable, cast aluminum tool plate. The plate is then carefully machined in multiple, high RPM passes on our state-of-art CNC equipment.

The result is a single-piece blade and handle square. This manufacturing process insures the 641 Squares are accurate to within .001 inch or less along the full length of the tool.

Once we have a perfect square we add two pieces of precision-machined aluminum to form the cheeks of the handle. These cheeks are fitted to the handle with two stainless steel dowel pins that ensure bulletproof rigidity and perfect alignment when pressed into their precision-machined holes. This kind of strength and accuracy simply cannot be matched by squares made using separate blade and handle parts or punched-out on a stamping press.

Features Galore. The blades on both squares are  1/4 " thick and the handle is a full  3/4 ". The inside edge of the of the square's handle features a shoulder to allow it to lay flat on the work so you can accurately mark either edge of the blade.

The thick base even makes it easy to stand the blade upright to check square on your table saw blade, jointer fence, band saw blade and other machinery setup operations.
$74.99 Regular Choose Options OUT OF STOCK

Woodpeckers 641M Precision Woodworking Square (Metric Scale)

M6201101 Available: 1
Unmatched Precision and Finest Quality Materials. The squares start the manufacturing process as a solid piece of very expensive, extremely stable, cast aluminum tool plate. The plate is then carefully machined in multiple, high RPM passes on our state-of-art CNC equipment.

The result is a single-piece blade and handle square. This manufacturing process insures the 641 Squares are accurate to within .001 inch or less along the full length of the tool.

Once we have a perfect square we add two pieces of precision-machined aluminum to form the cheeks of the handle. These cheeks are fitted to the handle with two stainless steel dowel pins that ensure bulletproof rigidity and perfect alignment when pressed into their precision-machined holes. This kind of strength and accuracy simply cannot be matched by squares made using separate blade and handle parts or punched-out on a stamping press.

Features Galore. The blades on both squares are  1/4 " thick and the handle is a full  3/4 ". The inside edge of the of the square's handle features a shoulder to allow it to lay flat on the work so you can accurately mark either edge of the blade.

The thick base even makes it easy to stand the blade upright to check square on your table saw blade, jointer fence, band saw blade and other machinery setup operations.
$65.99 Regular Choose Options OUT OF STOCK

Woodpeckers 851I Precision Woodworking Square (Inch Scale)

M6201102 Available: 2
Designed for woodworking, they deliver the precision woodworkers demand and offer features not found on most other squares. Beyond the extreme accuracy, these squares offer weight, balance and ease of handling that woodworkers need. The 841 square is accurate to within.001 inch or less along the full length of the tool. A dream to use, these squares are stout, yet light weight and offer superb balance. The blade is 1/4'' thick and the handle is a full 3/4'' thick. The inside edge of the base features a shoulder to allow the blade to lay flat on the work piece so you can accurately mark either edge of the blade. Unlike many squares, there's no need to tilt the square to reference the base edge against the work. The extra-thick base makes it easy to stand upright to check your table saw blade, jointer fences and other machinery. There is a notch at the inside corner so you can 'zero out' your layout line all the way to the edge of your work. Easy to read reasurement scales are laser etched in 1/16" increments on both sides of the blade.
$94.99 Regular Choose Options OUT OF STOCK

Carpenter Square 6"

M6201108 Available: 3
Quality furniture construction is easier to accomplish with quality tools. Our new 6" Carpenters Square is just such a tool. It's a perfectly machined combination 90 and 45 with handles for a physical reference to the edge of the work piece.

The blade is machined from cast and ground aluminum tool plate. This expensive material is utilized for its mechanical stability and tendency to maintain close tolerances after machining. By milling the blade from a single plate both angles are held to a much higher degree of precision than what's possible from stamped, molded or 2-pc tools.

The handles are milled from solid bar stock and fastened to the body with high strength socket screws. Separating the handles from the blade ensures they can be recalibrated to the blade if knocked out of position.

Anodized for durability and appearance, the Carpenters Square is also engraved with inch scale markings on the vertical leg. Made in U.S.A.
$79.99 Regular Choose Options OUT OF STOCK

Precision Triangle Set 4" & 6"

M6201110 Available: 2
For decades, craftsmen have used squares to layout projects on flat work pieces. Another handy layout tool, but often overlooked, is a triangle. It simultaneously serves as a square and a 45, all in one. A pocket or apron sized triangle is just the tool for squaring from the inside of boxes and drawers during assembly. Triangles are also great tools for quickly drawing perpendicular lines from an inside reference edge.

The design of our new PRECISION TRIANGLES were inspired from a small, apron pocket sized triangle I inherited from my Father In Law. As a pattern maker's apprentice in the 40's, he learned early on the value of this simple tool.
Well, now you can to. We've manufactured these anodized aluminum triangles to extremely accurate standards and guarantee perpendicular accuracy to well within .001".

Both sides have been carefully laser engraved with inch markings.
$79.99 Regular Choose Options OUT OF STOCK

Saw Gauge

M6201111 Available: 2
Woodworkers spend hundreds or even thousands of dollars on a table saw then spend hundreds more on high quality saw blades and still get burn marks when doing rip cuts. Even getting accurate results with a miter gauge can be difficult when the blade alignment is off. In most cases this is the result of misalignment between the miter slot, fence and blade.

For a perfect cut, the saw blade and rip fence must be dead parallel to the left hand miter gauge slot. The most reliable and accurate way to do this is with a dial indicator and tool that rides perfectly up and down the miter slot.

The new Woodpecker Saw Gauge is engineered to expertly satisfy this need. It's the first alignment tool that automatically adjusts to the width of the miter slot through the use of three precision ground steel pins. Regardless whether the slot is 5/8" wide like many older saws,  3/4 " wide like most current models or even somewhat over-sized; this unique arrangement will ensure a perfect fit and smooth traveling up and down the miter slot. No tools, no adjustments, just instant alignment.

Another exclusive feature is its ability to be set one distance to align the blade then in an instant be reset to a different distance for checking the fence and back to the exact original location for comparison measurements. No knobs, no tools, no recalibration.
$89.99 Regular Choose Options OUT OF STOCK

Straight Edge Rule 36"

M6201113 Available: 2
Get it straight. Whether it's your jointer or table saw, getting multiple horizontal surfaces on the same plane can be a challenge. Woodpeckers new 36" Straight Edge Rule will simplify this task along with numerous others in your shop.

It boasts straightness within .003" along its full length. That's .001" per foot. The base edge has two legs for increased stability. The opposite edge is formed at a 30 degree bevel and engraved with an inch scale. By sloping down toward the work piece, accurate measuring and marking gets much
easier.

Machined from aircraft grade aluminum and anodized for protection and appearance. Comes in a fitted wall mountable case.
$69.99 Regular Choose Options OUT OF STOCK

T-Square 12"

M6201114 Available: 4
Drawing straight, accurate lines can be challenging when relying on a tape measure and a scrap of wood as a straight edge.  Now there's a better way, the new Woodpecker T-Square. Whether working off a factory cut edge or not, the Woodpecker T-Square will help you draw straighter, more accurate parallel lines in less time than you can imagine.

In an instant, you can move your pencil from 3" off the edge to 12" and be dead-on without the need of a tape measure.

Each Woodpecker T-Square consists of a precisely machined, laser engraved, aluminum blade perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring.

The two critical parts are secured together with six precision socket screws.  This arrangement delivers top notch performance yet still allows for replacement of damaged blades.

The blade itself has precisely spaced 1MM holes drilled every 1/16".  Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line accurately following the stock edge. The outer edges are machined to a 30 degree bevel for easy reading and laser engraved scales for measuring .

Additional holes are machined on exact 1" centers for marking shelf pin locations.

Two different sizes are available, 12" and 24". The 12" size is ideal for work with solid lumber and smaller cabinet parts. The 24" is better suited for work with sheet goods.

We take great care in making these T-Squares so you can be sure that every marking is laser perfect and every hole is accurately spaced.  In fact we make these tools on machines accurate to fractions of a thousandth of an inch.

Accurate to .001", guaranteed for life.

And like all the tools Woodpeckers makes, they're machined in our shop, right here in the U.S.A.

Each T-Square comes in its own fitted, wooden, wall mountable case so you can be sure it's safely stored yet always in sight.
$94.99 Regular Choose Options OUT OF STOCK

Woodworking Rule 36"

M6201121 Available: 3
What makes our new Woodworking Rule better than your average yardstick? First it's much more accurate with precise laser engraved markings. Second it's straighter and heavier. Third it sits flat because of a recess down the center of the bottom surface. Fourth, it has both a standard and a center scale. Fifth, the markings are engraved on a 30 degree bevel for easy alignment to pencil marks. And finally, it looks nicer.

When you look at all the different rules being sold in retail stores, they're all pretty much intended for framing houses or general purpose use without any thought on how to make them better for those of us who build furniture and cabinets.
Tape measures are great if you're building a shed. They're not dependably accurate enough for finished furniture parts. Tape measures also don't make good straight edges to draw lines with. For that we usually look for the nearest scrap piece of lumber that we hope is straight.

Compare that to the application specific engineering that went into these new Woodworking Rules and you'll begin to appreciate the advantages. There is even a finger groove down the center to help steer the rule in to place.

Like all Woodpecker woodworking tools, made in the U.S.A. in our own machine shop.
$54.99 Regular Choose Options OUT OF STOCK

Woodpeckers 851M Precision Woodworking Square (Metric Scale)

M6201103 Available: Out of stock
Unmatched Precision and Finest
Quality Materials. The squares
start the manufacturing process
as a solid piece of very
expensive, extremely stable,
cast aluminum tool plate. The
plate is then carefully machined
in multiple, high RPM passes on
our state-of-art CNC equipment.

The result is a single-piece
blade and handle square. This
manufacturing process insures
the 641 Squares are accurate to
within .001 inch or less along
the full length of the tool.

Once we have a perfect square we
add two pieces of
precision-machined aluminum to
form the cheeks of the handle.
These cheeks are fitted to the
handle with two stainless steel
dowel pins that ensure
bulletproof rigidity and perfect
alignment when pressed into
their precision-machined holes.
This kind of strength and
accuracy simply cannot be
matched by squares made using
separate blade and handle parts
or punched-out on a stamping
press.

Features Galore. The blades on
both squares are 0" thick and
the handle is a full 0". The
inside edge of the of the
square's handle features a
shoulder to allow it to lay flat
on the work so you can
accurately mark either edge of
the blade.

The thick base even makes it
easy to stand the blade upright
to check square on your table
saw blade, jointer fence, band
saw blade and other machinery
setup operations.
$87.99 Regular Choose Options OUT OF STOCK