Squares & Protractors

Starrett Combination Square w/Square Head 6"

M6092963 Available: 1
The Starrett 6" Combination Square with Square Head features a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with regular finish. This product also includes a cast iron head with black wrinkle finish. 6", 4R Grad, Regular Blade
$94.99 Regular Choose Options OUT OF STOCK

Starrett Combination Square w/Square Head 4"

M6092964 Available: 1
The Starrett 4" Combination
Square with Square Head features
a reversible lock bolt, scriber,
and hardened steel,
photo-engraved blade with
regular finish. This product
also includes a cast iron head
with black wrinkle finish. 40,
4R Grad, Regular Blade
$89.99 Regular Choose Options OUT OF STOCK

Woodpeckers 641I Precision Woodworking Square (Inch Scale)

M6201100 Available: 2
Unmatched Precision and Finest Quality Materials. The squares start the manufacturing process as a solid piece of very expensive, extremely stable, cast aluminum tool plate. The plate is then carefully machined in multiple, high RPM passes on our state-of-art CNC equipment.

The result is a single-piece blade and handle square. This manufacturing process insures the 641 Squares are accurate to within .001 inch or less along the full length of the tool.

Once we have a perfect square we add two pieces of precision-machined aluminum to form the cheeks of the handle. These cheeks are fitted to the handle with two stainless steel dowel pins that ensure bulletproof rigidity and perfect alignment when pressed into their precision-machined holes. This kind of strength and accuracy simply cannot be matched by squares made using separate blade and handle parts or punched-out on a stamping press.

Features Galore. The blades on both squares are  1/4 " thick and the handle is a full  3/4 ". The inside edge of the of the square's handle features a shoulder to allow it to lay flat on the work so you can accurately mark either edge of the blade.

The thick base even makes it easy to stand the blade upright to check square on your table saw blade, jointer fence, band saw blade and other machinery setup operations.
$74.99 Regular Choose Options OUT OF STOCK

Woodpeckers 641M Precision Woodworking Square (Metric Scale)

M6201101 Available: 1
Unmatched Precision and Finest Quality Materials. The squares start the manufacturing process as a solid piece of very expensive, extremely stable, cast aluminum tool plate. The plate is then carefully machined in multiple, high RPM passes on our state-of-art CNC equipment.

The result is a single-piece blade and handle square. This manufacturing process insures the 641 Squares are accurate to within .001 inch or less along the full length of the tool.

Once we have a perfect square we add two pieces of precision-machined aluminum to form the cheeks of the handle. These cheeks are fitted to the handle with two stainless steel dowel pins that ensure bulletproof rigidity and perfect alignment when pressed into their precision-machined holes. This kind of strength and accuracy simply cannot be matched by squares made using separate blade and handle parts or punched-out on a stamping press.

Features Galore. The blades on both squares are  1/4 " thick and the handle is a full  3/4 ". The inside edge of the of the square's handle features a shoulder to allow it to lay flat on the work so you can accurately mark either edge of the blade.

The thick base even makes it easy to stand the blade upright to check square on your table saw blade, jointer fence, band saw blade and other machinery setup operations.
$65.99 Regular Choose Options OUT OF STOCK

Woodpeckers 851I Precision Woodworking Square (Inch Scale)

M6201102 Available: 2
Designed for woodworking, they deliver the precision woodworkers demand and offer features not found on most other squares. Beyond the extreme accuracy, these squares offer weight, balance and ease of handling that woodworkers need. The 841 square is accurate to within.001 inch or less along the full length of the tool. A dream to use, these squares are stout, yet light weight and offer superb balance. The blade is 1/4'' thick and the handle is a full 3/4'' thick. The inside edge of the base features a shoulder to allow the blade to lay flat on the work piece so you can accurately mark either edge of the blade. Unlike many squares, there's no need to tilt the square to reference the base edge against the work. The extra-thick base makes it easy to stand upright to check your table saw blade, jointer fences and other machinery. There is a notch at the inside corner so you can 'zero out' your layout line all the way to the edge of your work. Easy to read reasurement scales are laser etched in 1/16" increments on both sides of the blade.
$94.99 Regular Choose Options OUT OF STOCK

Carpenter Square 6"

M6201108 Available: 3
Quality furniture construction is easier to accomplish with quality tools. Our new 6" Carpenters Square is just such a tool. It's a perfectly machined combination 90 and 45 with handles for a physical reference to the edge of the work piece.

The blade is machined from cast and ground aluminum tool plate. This expensive material is utilized for its mechanical stability and tendency to maintain close tolerances after machining. By milling the blade from a single plate both angles are held to a much higher degree of precision than what's possible from stamped, molded or 2-pc tools.

The handles are milled from solid bar stock and fastened to the body with high strength socket screws. Separating the handles from the blade ensures they can be recalibrated to the blade if knocked out of position.

Anodized for durability and appearance, the Carpenters Square is also engraved with inch scale markings on the vertical leg. Made in U.S.A.
$79.99 Regular Choose Options OUT OF STOCK

T-Square 12"

M6201114 Available: 4
Drawing straight, accurate lines can be challenging when relying on a tape measure and a scrap of wood as a straight edge.  Now there's a better way, the new Woodpecker T-Square. Whether working off a factory cut edge or not, the Woodpecker T-Square will help you draw straighter, more accurate parallel lines in less time than you can imagine.

In an instant, you can move your pencil from 3" off the edge to 12" and be dead-on without the need of a tape measure.

Each Woodpecker T-Square consists of a precisely machined, laser engraved, aluminum blade perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring.

The two critical parts are secured together with six precision socket screws.  This arrangement delivers top notch performance yet still allows for replacement of damaged blades.

The blade itself has precisely spaced 1MM holes drilled every 1/16".  Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line accurately following the stock edge. The outer edges are machined to a 30 degree bevel for easy reading and laser engraved scales for measuring .

Additional holes are machined on exact 1" centers for marking shelf pin locations.

Two different sizes are available, 12" and 24". The 12" size is ideal for work with solid lumber and smaller cabinet parts. The 24" is better suited for work with sheet goods.

We take great care in making these T-Squares so you can be sure that every marking is laser perfect and every hole is accurately spaced.  In fact we make these tools on machines accurate to fractions of a thousandth of an inch.

Accurate to .001", guaranteed for life.

And like all the tools Woodpeckers makes, they're machined in our shop, right here in the U.S.A.

Each T-Square comes in its own fitted, wooden, wall mountable case so you can be sure it's safely stored yet always in sight.
$94.99 Regular Choose Options OUT OF STOCK

Starrett 505A-12 Prosite Protractor 12"

M6227731 Available: 1
Measuring accurate angles and making accurate cuts saves you time, reduces the amount of material that you waste, and helps you get jobs done quickly and efficiently. That's where precision tools like the ProSite Miter Saw Protractor come in.
Featuring a patented, easy-to-use design, this tool offers two scales for quick reference. The scales have been laser engraved for exceptional accuracy with each measurement. The miter cut arrow shows the required angle for crafting a precise miter joint, while the single cut arrow provides you with the angle needed to fit a single work piece to an existing angle. The protractor gives you correct measurements every time, even when you're viewing your work piece backwards or upside down.
$99.99 Regular Choose Options OUT OF STOCK

Starrett 505A-7 ProSite Miter Saw Protractor

M6227736 Available: 2
No miter saw is complete without this patented and multiple award winning invention. This is the new and conveniently smaller model of the very popular Starrett ProSite Miter Saw Protractor, the 505A-12. This smaller 7-Inch version (505A-7) is ideal for getting into tight quarters and it conveniently slips in your tool pouch or back pocket. The Starrett ProSite Miter Saw Protractors take error-prone calculations out of the process of miter cuts and other angle cuts. Simply set your saw to the angle that you read on the tool. There are absolutely no calculations. Upside down or backwards, the reading is always correct. These easy-to-use tools have two scales. The red scale and red -InchMiter Cut-Inch arrow provide the exact miter saw setting for a perfect miter joint, while the black scale and black -InchSingle Cut-Inch arrow provide the exact miter saw setting for fitting a single work piece to any angle. The ProSite Miter Saw Protractors save time and reduce waste. They are ideal for carpenters, plumbers and all building trades which require the measuring and transferring of angles. They are also invaluable for home use and do-it-yourselfers. They are the perfect and essential companion for every miter saw user. Buy both models and cover all your angles!
$84.99 Regular Choose Options OUT OF STOCK

Woodpeckers 851M Precision Woodworking Square (Metric Scale)

M6201103 Available: Out of stock
Unmatched Precision and Finest
Quality Materials. The squares
start the manufacturing process
as a solid piece of very
expensive, extremely stable,
cast aluminum tool plate. The
plate is then carefully machined
in multiple, high RPM passes on
our state-of-art CNC equipment.

The result is a single-piece
blade and handle square. This
manufacturing process insures
the 641 Squares are accurate to
within .001 inch or less along
the full length of the tool.

Once we have a perfect square we
add two pieces of
precision-machined aluminum to
form the cheeks of the handle.
These cheeks are fitted to the
handle with two stainless steel
dowel pins that ensure
bulletproof rigidity and perfect
alignment when pressed into
their precision-machined holes.
This kind of strength and
accuracy simply cannot be
matched by squares made using
separate blade and handle parts
or punched-out on a stamping
press.

Features Galore. The blades on
both squares are 0" thick and
the handle is a full 0". The
inside edge of the of the
square's handle features a
shoulder to allow it to lay flat
on the work so you can
accurately mark either edge of
the blade.

The thick base even makes it
easy to stand the blade upright
to check square on your table
saw blade, jointer fence, band
saw blade and other machinery
setup operations.
$87.99 Regular Choose Options OUT OF STOCK