Tools

Hi-Lift X-TREME Jack 48"

M8560300 Available: 3
The only all-cast jack manufactured and made of high yield and tensile strength iron castings. 7,000 lb. tested capacity. Lifts, winches, clamps and more. Top winch-connector clamp. Powder-coated finish with zinc plated hardware. Includes safe use and load rating information. Two-piece handle and socket, proven durable design. SIZE 48",COLOR Red
$89.99 Regular Choose Options OUT OF STOCK

Hi Lift Loc Rac Truck Bed Mounting System

M8560301 Available: 4
Installation is simple. It can be mounted horizontally or vertically, with or without a Jack Protector. Your Hi-Lift Jack is mounted in an easy to reach location and is locked to deter theft. Designed to fit the bedrail of most pickups. Each kit contains 2 mounting brackets, a padlock, and all necessary mounting hardware.
$29.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack Protector

M8560302 Available: 5
Hi-Lift Jack Protector protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant. Fits 36", 42", 48" and 60" Hi-Lift Jacks.  Soft case easily stores an has a draw string closure. The Jack Protector WILL work with the 4XRAC and the LOC-RAC. (user will have to place holes in protector) Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed.
$34.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack Fix-it-Kit

M8560303 Available: 2
Extra parts for servicing all Hi-Lift Jack lifting units. Kit includes: 2 climbing pins, 2 climbing pin springs, 2 cross pins, 1 shear bolt and nut and 1 tube of jack lubricant.
$24.99 Regular Choose Options OUT OF STOCK

Hi-Lift Jack 48"

M8560304 Available: 3
For agriculture, automotive, offroad, hardware, industrial and D.I.Y. uses. Multi purpose, for lifting, winching and clamping. Low pick-up with lifting nose only 4-1/2'' from bottom of base plate. 4-1/2'' lifting nose for safe, positive contact with load. 28 square inch base plate for extra stability. Complete with adjustable top clamp clevis for use in clamping and winching. For speedy disengaging, lifting unit automatically drops away when load is removed. Safety bolt is designed to shear at 7,000 pounds. Approximate weight 30 pounds.
$81.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack Bumper LIft

M8560305 Available: 7
The The Hi-Lift Bumper Lift is designed to fit most steel curved bumpers, for quick and easy lifting. The Bumper Lift has a 3,000lb (1361 kg) capacity. When used with the Hi-Lift Jack  which is not itself designed to be used on curved bumpers  the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task. Never attempt to lift more than one wheel at a time.
$29.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack Lift-Mate

M8560308 Available: 2
Hi Lift Jack Lift Mate
Many trucks and SUV's have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height. Lift Capacity: 5000 lbs. (2273 kg). Rubber-Coated hooks to protect the wheel . Rubber pad for protecting the tire and wheel. Lift Directly from the Wheel - Plastic Bumpers and Extreme Lift-Kits Are No Longer a Problem.
$39.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack Handle Keeper Red

M8560310 Available: 12
The rugged polyurethane Handle-Keeper holds the Hi-Lift0 handle to the upright steel bar, keeping it in place when not in use and eliminating "rattling" during transportation and storage. The Handle-Keeper easily slips on and off over the Hi-Lift Top Clamp-Clevis to allow for proper use of the Hi-Lift Jack. The unique design eliminates the need to remove the Top Clamp-Clevis for putting on or taking off the Handle-Keeper.
$15.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack Mounting System

M8561924 Available: 6
The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.
$34.99 Regular Choose Options OUT OF STOCK

Hi-Lift Jack Off Road Base

M8562175 Available: 1
Increase your support surface area and make the original power tool even more versatile! Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground. Convenient to use, easy to store. Rugged construction meets Hi-Lift Jack specifications for strength & durability. Can be used with ANY model of Hi-Lift Jack.
$46.99 Regular Choose Options OUT OF STOCK

Hi Lift Jack 60" Cast & Steel

M8560307 Available: Out of stock
For agriculture, automotive, offroad, hardware, industrial and DIY uses. Multi purpose, for lifting, winching and clamping. Low pick-up with lifting nose only 4-1/2'' from bottom of base plate. 4-1/2'' lifting nose for safe, positive contact with load. 28 square inch base plate for extra stability. Complete with adjustable top clamp clevis for use in clamping and winching. For speedy disengaging, lifting unit automatically drops away when load is removed. Safety bolt is designed to shear at 7,000 pounds. Approximate weight 30 pounds.
$99.99 Regular Choose Options OUT OF STOCK