Anchors & Toggles

Woodmates Furniture Repair Kit "Mr.Grip"

5002829 Available: 12
Woodmates Mr. Grip 1298
    * Furnture repair kit
    * A toothy, flexible metal strip that grips tight
    * Just cut strip to size needed, place over end of dowel, and push into place
    * No glue or clamping
    * (8) 1/2" x 4" strips per card.
Product Description
Furnture repair kit. A toothy, flexible metal strip that grips tight. Just cut strip to size needed, place over end of dowel, and push into place. No glue or clamping.
A MUST HAVE item for every tool kit. Has saved many a project gone awry!
$2.99

Fluted Plastic Anchor 4-6"x1"

22450215 Available: 43
The Fluted Plastic Anchor is designed for light duty fastening applications in concrete, block, brick or stone
The body of the fluted plastic anchor and is injection molded from a ductile plastic and is designed to be used with sheet metal or wood screws
The Load capacities for this product depend on the integrity of the base material in which it is installed
The anchor is recommended for light duty static applications where holding power is not a critical factor
It should not be used overhead

Powerbolt Anchor Hex 3/8"x3"

22450347 Available: 18
Sleeve concrete anchors are used in brick, concrete and grout-filled or hollow concrete block. They have an internal expander that pulls up and expands the anchor(TM) s sleeve when the anchor(TM) s nut is tightened. This increases holding power. Concrete Anchors; Type: Sleeve; System of Measurement: Inch; Diameter (Inch): 3/8; Material: Carbon Steel; Overall Length (Inch): 3; Material Grade: Grade 8

EZ Anchor w/Screws 15 PC

22450637 Available: 12
E-Z Ancor Self-Drilling Drywall Anchor. 15-Plastic Anchors. 15-8 x 1 1/4" Combo Pn Sms. Medium Duty Application.
$6.49

GRK EZ Anchor w/Screws Zinc 15pc

22450643 Available: 7
Used to attach hanging rail. wall mounted uprights to wall. For wood, masonry and hollow wall applications One packet adhesive screw head covers. Screws size 8" x 1.5"
$6.49

Toggler Alligator Anchor 50445 AF5 3/16"

22450645 Available: 26
The TOGGLER ALLIGATOR AF5 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #8 x 1-1/4" sheet metal screws for fastening, and is made in USA. Once inserted into a 3/16" drilled hole in a wall, ceiling, or floor, the included screw inserts into the anchor. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #4 to #9 size screw with a screw length at least equal to the thickness of the item being fastened plus 1-3/16".
$3.99

Mechanical Plastics 50470 Alligator Toggler 1/4"

22450650 Available: 25
The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #10 x 1-1/2" sheet metal screws for fastening, and is made in USA. Once inserted into a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8".
$4.49

Mechanical Plastics 50490 Alligator Toggler 5/16"

22450655 Available: 26
The TOGGLER ALLIGATOR AF8 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #12 x 1-3/4" sheet metal screws, and is made in USA. Once inserted into a 5/16" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #8 to #14 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-13/16".
$5.99

Toggler Plastic Toggle 50275 1/8"-1/4" 5pk

22450670 Available: 21
The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.
$3.99

Toggler Plastic Toggle 50300 3/8"-1/2" 5pk

22450675 Available: 18
Holds up to 143 lbs in 1/2 In. drywall with #8x1-1/2 In. combo head screw included in the package (Industry standards recommend 1/4 of this ultimate load per anchor)
Locks on walls and ceilings 3/8" to 1/2" for vibration-proof holding Packaged with #8x1-1/2" screw, but works with any screw #6 through #14 with minimum thread length 1-1/4" plus thickness of the item to be anchored
Can use a screw gun to install . anti-rotation fins prevent the anchor from spinning
$3.99

Toggler Plastic Toggle 50325 5/8"-3/4" 5pk

22450680 Available: 20
The Toggle TC commercial drywall anchor provides a firm hold in 5/8"- to 3/4"-thick drywall, includes #8 x 1-3/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #6 to #14 size screws with a minimum thread length of 1-1/2". The Toggle TC anchor meets Federal Specification FF-B-588-D for Type IV anchors.
$3.99

Snap Toggler Anchor w/Bolts 3/16"

22450720 Available: 43
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 3/16"-24 UNC-threaded bolts
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
$3.99