Search

Seneca Woodworking Clamp Dog for Festool MFT Table

M5085801 Available: Not Available - Out of Stock
The Seneca Woodworking Clamp Dog is a combination bench dog and clamp mounting plate designed for the Festool MFT tables.  The dog portion allows you to take advantage of the grid of holes in the MFT to make precise cuts. The clamp portion of the Clamp Dog is pre-drilled with mounting holes that allow you to attach either a Kreg Automaxx Bench Klamp, or a Bessey Auto-Adjust Toggle Clamp for quick, accurate clamping of your workpiece.

Seneca Woodworking Clamp Dogs are designed with the clamp mount "tangent" to the MFT dog, rather than on center. Our design also uses hole offset dimensions similar to Qwas Products Qwas Dogs and other similar MFT dogs on the market, so they can be used interchangeably for accurate positioning. This "tangent" design, allows the clamp to pivot around the mounting hole, rather than on top of it. This allows more usable workspace on the MFT, and also allows the clamps to be positioned at various angles for more effective clamping, while not affecting the positioning of the workpiece.

Machined from a solid block of aircraft grade aluminum and anodized black, the Seneca Woodworking Clamp Dogs will give you years of reliable service.

Included with each Clamp Dog are mounting hardware for Bessey Toggle Clamps (Kreg clamps include mounting hardware) and a hand knob to secure it to the MFT table.
$39.95 Regular Choose Options OUT OF STOCK

Seneca Woodworking Paralle Guide System with T-Track

M5085454 Available: Not Available - Out of Stock
The Seneca Woodworking Parallel Guide System is a set of precision machined aluminum components that mount to your track saw guide rail and enable the making of consistent sized repetitive rip cuts.  The Parallel Guide System acts as a rip fence / rip guide for your track saw, multiplying the speed at which panels can be cut to size with speed and precision.  This system works with both Festool and Makita brand track saws.
To make a cut, simply set both stops to the width of the piece you want to cut,  locate your guide rail on top of your workpiece using the stops as a reference then make your cut.
The Parallel Guide System uses Incra T-Track Plus as one of its major components. This allows you to expand the system if you need more cutting capacity.   We include two 24" lengths of Incra T-Track Plus with the system, which allows roughly 31" of cutting capacity with the system, but this this can be expanded by swapping the 24" T-Track Plus for longer lengths.
All three main components of the system are precision machined from aluminum and anodized black.  The Slider Mount adapters are un-anodized.

Included in this set:
-Two (2) Rail Brackets (for attaching Incra T-Track Plus to the Festool or Makita guide rail)
-Two (2) Adjustable Rail Stops
-Two (2) Interlocking Narrow Stops (adjustable from top of Incra T-Track) -Two (2) machined "slider mount" adapters for attaching the Narrow stops to the T-Track
-Two (2) 24" Incra T-Track Plus (allows cuts of up to 31" width)
-all necessary knobs and hardware
$224.95 Regular Choose Options OUT OF STOCK

Seneca Woodworking Cutter Adapter for DF700

M5085805 Available: 2
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700.  This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500.   This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth.
$69.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Domi-Shim for DF700

M5085803 Available: 3
The Seneca Woodworking  Domi-Shim is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all the way to the cutter centerline, allowing centering on material thinner than the Domino XL fence's  lower travel limit would previously allow.   This shim can be used with the Domino XL in several ways:
-By itself, using a rule or setup block to adjust the fence to achieve the proper offset for a variety of material thicknesses, both imperial or metric.
-By itself with the Domino XL fence offset gauge set to "15mm." This creates the correct offset for centering a mortise on 1/2" nominal plywood.
-The Domi-Shim is machined from aluminum, black anodized and laser-engraved. Mounting hardware is included.
$36.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking DF500 Domiplate 1/2 in., 3/4 in.

M5085806 Available: Not Available - Out of Stock
The Seneca Woodworking Domiplate is a fixed fence solution designed for the Festool Domino DF 500  mortising tool.  It allows quick adjustment for the repeatable mortising of 1/2" or  3/4" nominal plywood simply by turning the plate over.  The Domiplate is a fixed fence that eliminates the possibility of fence drift, saving time and money due to misaligned mortises. The Domiplate comes with two captive screws and a textured ball knob for a secure, comfortable grip during use. Made of aircraft grade aluminum. Hard coat anodized and laser engraved with size markings.
$64.95 Regular Choose Options OUT OF STOCK