Corded & Pneumatic Power Tools

Milwaukee 1/2 in. Keyed Hammer Drill

22744 Available: 2
This popular 1/2 inch Hammer-Drill is now available in a kit with an impact resistant carrying case. This Hammer-Drill features a two mode selection switch for Hammer-Drilling in concrete or Rotation only for drilling in wood. It also offers a synchronized gear shift for high speed or high torque. The compact ergonomic design has a soft grip handle and two finger trigger switch for greater operator comfort. This tool is ideal for setting concrete screw fasteners and drilling small holes for anchors. It can also be used in the drilling only mode for holes in wood, steel and plastic. The 5378-21 Hammer-Drill comes with a depth gauge, removable side handle, 1/2 in. chuck with key, and impact resistant carrying case.
$139.99 Regular Choose Options OUT OF STOCK

Electric Swivel Power Shears 18G

27284 Available: 2
Variable speed trigger, lightweight, heavy-duty magnesium gear case, 360 degree swivel head, ergonomic tactile grip. Specs: 120V/AC, 0-2,500 SPM, Capacity in: (steel-18 gauge) (stainless-20 gauge), double insulated, trigger lock, 7" minimum cutting radius, 10 ft. fixed cord, 12-1/4" long, weighs 4.1 lbs. Includes: hex wrench.
$169.99 Regular Choose Options OUT OF STOCK

Variable-Speed Belt Sander w/ Cloth Dust Bag 3"x21"  

28831 Available: 2
Variable speed dial, motor is located over platen for performance and balance, belt and gear drive system transfers power from the motor to the sanding belt, flush sanding up to vertical surfaces, dust bag swivels 360 degrees, fingertip belt tracking knob, quick release belt change lever. Specs: 120V/AC, 25-60 Hz, SFPM 850-1,300, 12.5"Lx5.75"Wx10.38"H, weight 10.75 lbs. Includes: (1) 100g ceramic aluminum oxide belt, dust bag assembly.
$184.99 Regular Choose Options OUT OF STOCK

690LR Router 1-3/4 Horsepower

28835 Available: 2
Micrometer depth adjuster accurate to 1/128". Cam lock lever enables simple coarse height adjustments and motor release. Precision machined aluminum motor housing and base, dust sealed switch and sealed ball bearing construction. Auto release collet system allows for easy bit removal, collets included to accept 1/4" and 1/2" shank bits. Under table stop prevents motor from inadvertently rotating out of base. Overmolded grips for greater comfort. Specs: 120V/AC, 25-60Hz, 27,500RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, 5-3/4" round base, LxWxH (12"x5.5"x8-5/8"), weighs 8lbs. Includes: router motor, 1/4" & 1/2" collets, collet wrench and operating manual.
$149.99 Regular Choose Options OUT OF STOCK

Dewalt DW130V Variable Speed Heavy Duty Mixing Drill 1/2"

29299 Available: 2
Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (self-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder.
$179.99 Regular Choose Options OUT OF STOCK

Dewalt Impact Wrench Kit 1/2"

29303 Available: 2
Ready to take on even the toughest fastening jobs, the heavy-duty DeWalt DW292K 1/2-inch impact wrench is powerful and easy to handle. Featuring a 7.5 amp motor that delivers 345 foot-pounds of torque, this tool is a perfect bet for applications ranging from deck building to plumbing fixture installation. Behind the reliability of this driver is a patented anvil design that includes a detent pin for secure socket retention, increased strength, and long-term durability.

Its convenient, ergonomic design includes a well-balanced body and a soft, comfortable grip for improved accuracy and reduced operator fatigue, which you'll appreciate when you're up against repetitive tasks. Common applications include: garage door installation, erecting steel structures, attaching ledger boards for deck building, and guard rail assembly and disassembly. This kit comes with a heavy-duty soft bag that protects the tool during transport and makes storage easy.

Amps: 7.5 amps
No Load Speed: 2,100 rpm
Max Torque: 345 foot-pounds
Impacts per Minute: 2,700 ipm
Tool Length: 11-1/4 inches
Tool Weight: 7 pounds
$179.99 Regular Choose Options OUT OF STOCK

Trim Compressor 1GAL

1337203 Available: 3
DEWALT D55140 Heavy-Duty 1-Gallon 135 PSI Max Trim Compressor
Ideal for finish carpenters and woodworkers, the D55140 can be used for custom installation of shelves or other furniture, cabinet trim installation and for pressure-testing new plumbing lines.
Performance -The D55140 produces .75 SCFM at 90 PSI, 135 PSI (Max), delivering high surge performance with quick recovery, and at 69 dBA, provides end users with a quieter operation, compared to existing compressors in the marketplace. The compressor was designed with a 2.6 amp draw motor to deliver easy start-up and reduced breaker tripping, as well as a high flow regulator that
provides maximum air pressure to increase jobsite performance. The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for users to check or refill the pump, and also helps to keep the jobsite clean by preventing oil from transferring to work surfaces.
Ease of Use/Portability- The compact design of this unit is ideal for end users who prefer hand carry compressors. Weighing just 24 pounds and measuring 9" wide, the compressor is easily transported and stored, making it ideal for knock-out work. In addition, DEWALT equipped the compressor with a one-hand, universal quick connect for easy-to-use operation. For increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and a convenient cord wrap for easy storage.
Durability- The efficient and unique design of the D55140 ensures maximum durability and longevity. DEWALT built the heavy-duty compressor with an innovative roll cage, full-protection frame design to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection to key components of the compressor.
$169.99 Regular Choose Options OUT OF STOCK

Craftsman Compressor 3 Gallon

1409242 Available: 2
This Craftsman 3 gallon oil lube air compressor makes the job easy and quick. It also makes short work of filling bike tires, basketballs, air mattresses, and more. The housing material is steel for a long life. It has a 1.0 HP motor with a maximum operating pressure of 135 psi.
$199.99 Regular Choose Options OUT OF STOCK
InStore

Sawzall Reciprocating Saw 12Amp

2033090 Available: 2
The 6509-31 Sawzall reciprocating saw delivers best-in-class cut speed, durability, and power with 0-3,000 strokes per minute, a 3/4-Inch stroke length, and a 12-amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a Quik-Lok blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics.
$139.99 Regular Choose Options OUT OF STOCK

Die Grinder 1/4"

2114478 Available: 2
Powerful motor with fast 25,000 RPM. Easy-to-handle at only 3.7 lbs. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. Solid aluminum housing with stepped neck for added durability. Vent slots designed to direct exhaust air away from the user. Round-shaped collet nut reduces the possibility of damage. AC/DC switch for use with alternative power source. Easy-to-operate slide switch. High heat resistance.
$109.99 Regular Choose Options OUT OF STOCK

55-Degree Close Quarter Drill 3/8"

2192680 Available: 1
Provides a unique chuck angle for reaching into tight areas. Large paddle trigger, textured grip with convenient forward/reverse lever. Angled cord exit keeps cord out of work area. Specs: 120 volts AC, 0-1,300rpm, 1/2in.-20 spindle, 3/8" metal twist bit capacity, double insulated construction, double gear train, 8 ft. fixed cord and weighs 3.9 lbs. Includes chuck key with holder.
$129.99 Regular Choose Options OUT OF STOCK

Abrasive Cut Off Saw 14"

2360972 Available: 2
A quick set-up, quick release locking device holds material being cut securely during the cutting process. Material can be angle cut up to 45 degrees. Arm locks down for easy portability. Applications: fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar. Workpiece capacity: cutting pipe 5" O.D., bar stock 3-5/8", square stock 5". Specs:15 amp motor, 120 volts AC only. No load RPM 3900. 1" arbor. 9" maximum opening. Includes: vise, abrasive wheel and hex wrench.  Rental.
$199.99 Regular Choose Options OUT OF STOCK