General Tools Dowel Cent Set 8pc

20759 Available: 2
Made from nickel-plated steel and used for accurate match and transfer of dowel holes. Includes: (2) two each: 1/4", 5/16", 3/8? and 1/2".
$5.99 Regular Choose Options OUT OF STOCK

General Tools Revolving Turret Jig Doweling 840

21783 Available: 1
Unique revolving turret design is extremely accurate and simple to use for end to end, edge to edge or edge to end doweling. Accepts 6 sizes of twist bits: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2". Guide bars are graduated for fast positioning of hole center. Used to making fast, accurate dowel holes in furniture and other carpentry applications. Includes: three (3) brad point drill bits: 1/4", 5/16" and 3/8", 30 dowel pins: ten (10) of each 1/4", 5/16" and 3/8", (3) three drill stops: 1/4", 5/16" and 3/8, (6) six dowel centers (2) two each: 1/4, 5/16" and 3/8", 1 hex wrench, craft glue.
$36.99 Regular Choose Options OUT OF STOCK

Kreg MKJKIT Mini Pocket Jig Kit 3/8"

2214310 Available: 3
For application where the smallest jig possible is required. Unlimited material thickness. Fenceless design allows you to make precise angle and stock depth adjustments. Hardened steel drill guide. Glass-reinforced Nylon Body. Plug setting guide helps to fully seat wood plugs. Works with a variety of common clamps or any Kreg Face Clamp. 1/2" to unlimited screw centering ability. Kit includes the mini Kreg Jig, stepped drill bit, depth collar and allen wrench.
$24.99 Regular Choose Options OUT OF STOCK

Kreg Pocket Hole Jig Jr. R3

2214450 Available: 4
Features two independent positioning sliders, nine individual depth settings, two wood chip relief holes, and hardened steel drill guides. 7/8" drill guide spacing. Works with with a wide variety of clamps. Face Clamp for clamp pad adapter. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8" and 1-1/2" screw centering ability. Kit contains Kreg Jig Jr., clamp adapter, stepped drill bit, 6" driver bit, depth collar, allen wrench, starter screw set, instruction manual, and carrying case.
$44.99 Regular Choose Options OUT OF STOCK

K4 Pocket Hole Jig Kit

2214518 Available: 3
Includes everything needed to get started with -,Kreg joinery (TM),Kit allows you to drill pocket-holes at problem-,joint then drive self-tapping screws to secure,Includes: Kreg Jig(R), spacer block, stepped -,drill bit, 6" square driver, starter screw set,-,starter plug set, Skillbuilder(TM) DVD & quick-,start guide
$99.99 Regular Choose Options OUT OF STOCK

Kreg 1 Fine Pan Head Screw SPS‑F1 100"

2222065 Available: 6
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
This 1" fine thread, #2 square drive pan head screw works well in 1/2" thick, hardwood material such as oak, maple, hickory, cherry and walnut. The deep recess, pan head of this screw provides excellent driver engagement and is popular in framing applications involving hardwoods. The screw features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.
$4.99 Regular Choose Options OUT OF STOCK

Kreg Zinc Pocket Hole Screws 1-1/4", #8 Coarse, Washer Head, 500 Count

2222198 Available: 5
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
-Hole screws prevent overdriving in pocket bottoms
-Self-tapping auger tips do away with predrilling
-Large diameter of steel shank creates durable screw
-1-1/4" screw length for joining 3/4" stock
$22.99 Regular Choose Options OUT OF STOCK

Toolbarn 7 Fine Washer Head Pocket Screws 1‑1/4" 500ct

2222263 Available: 3
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
-Pocket-hole #7 screw x 1-1/4" fine
-Use with hardwoods such as oak, walnut, maple, cherry, hickory
-Fine threads provide greater holding power
-Washer-head style
-500 pack
$22.99 Regular Choose Options OUT OF STOCK

Kreg Zinc Pocket Hole Screws 2-1/2", #8 Coarse, Washer Head, 250 Count

2223329 Available: 5
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
$22.99 Regular Choose Options OUT OF STOCK

Kreg Zinc Pocket Hole Screws 1-1/4", #7 Fine, Washer-Head, 100 Count

2223360 Available: 6
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
1-1/4" Fine Thread self-tapping screws are specially designed for pocket hole joinery. They feature a self-tapping auger point that eliminates pre-drilling and a flat head that seats flushly in the bottom of the pocket hole. All of our screws utilize a No. 2 square drive recess. The deep recess of the square drive provides positive driver engagement to reduce cam-out. Like every Kreg product, our screws are manufactured from the highest quality materials.
$4.99 Regular Choose Options OUT OF STOCK

King Arthur Tools Lancelot Blade 5/8"x 14T

2237899 Available: 2
Lancelot 14 Tooth Chain Saw Blade for Grinders - 5/8" arbor
The 14 tooth Lancelot chain saw cutter fits most 4 1/2" (115mm) and 125mm European angle grinders.  5/8"(16mm) center hole.  More aggressive than the 22 tooth and leaves a coarser finish but you'll be amazed at the smooth finish. NOTE: Only 5/8" (16mm)  center hole blades may be tandem mounted. Excellent for rapid wood removal, cutting and general shaping.
Lancelot and Squire are used on disc or angle grinders as individual blades and may also be used in tandem combinations with the addition of our Universal Nut.
All the saw chain cutters feature a full house design - which means the chain circlet consists of consecutive left and right teeth - the teeth are not seperated by skip links common to standard chain saw.  All the blades have twice the amount of regular teeth, resulting in the blade powering its way through the hardest of woods and other soft non-ferrous materials.
This
important feature, combined speed of the angle grinder rotating at between 10,000 to 13,000 rpm's provides users with most effcient and powerful cutting and shaping tool accessory in the world.  Should the blade hit a nail or piece of wire in the wood, on most occasions it will cut through
the
obstruction.  If not, the impact will cause the chain to stop while the discs rotate giving the user a waring to stop the angle grinder.  This is a major safety feature which virtually eliminates kickback and binding.
All the chains are easily sharpened with a 5/32" chain saw file.
Fits most popular angle grinders including - Bosch - B&D - Craftsman - Dewalt - Fein - Hitachi - Milwaukee - Porter Cable
Safety & Assembly Instructions
Do NOT use Lancelot or Squire on any Makita brand grinders. We only recommend use of 4-1/2" (115mm) angle grinders with a constant pressure switch (paddle, kill or dead man switch).
DO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD
   1. Your work piece is secured in a work bench, vise or manner that insures it is safe to cut.
   2. You're wearing protective safety clothing and all instructions for
the
assembly of our tools have been faithfully carried out!
   3. You will see constant references to Lancelot, however, you can assume the same principles apply to Squire should you use Squire on its own.
   4. I'm going to refer to wood as the object being cut, however, if your subject is ice, bonsai trees, rubber or any other soft non-ferrous materials, the cutting techniques are the same.
   5. The depth of cut on Lancelot is 1-3/16", Squire is 11/16".
   6. These tips are written for right hand use carving simply because our tools fit right hand angle grinders. The standard hand position is to lightly but firmly grip the auxiliary handle with your left hand and the body of the grinder with your right. There's no need to use a vise grip and make your knuckles go white with the pressure - you'll exert much easier control with a firm relaxed grip.
$49.99 Regular Choose Options OUT OF STOCK

King Arthur Tools Lancelot Blade 5/8"x 22T

2237956 Available: 2
-Teeth are easily sharpened with 5/32-inch round file
-Fits most 4" (100mm), 4-1/2" (115mm) and European 125mm disc/angle
grinders
-Cuts the hardest woods in any direction
-Great for mass removal of wood
-Sculpts, channels, hollows, and cuts curves
$49.99 Regular Choose Options OUT OF STOCK