Craftsman Wet/ Dry Vac Filter 2 Gallon

2295525 Available: 2
Fits most 2 and 2.5 gallon Craftsman vacuums. For dry debris pick-up only. Includes 3 replacement filter bags.
$6.99 Regular Choose Options OUT OF STOCK

General Tools EZ Dowel Kit 841

2399178 Available: 2
Our E-Z Dowel Kit includes everything you need to make beautiful wood joints like a pro! The heavy duty aluminum jig effectively simplifies the doweling process, allowing you to create Edge-to-Edge, Right Angle and Edge-to-Surface joints with little effort. The kit also includes three Brad Point drill bits and drill stops, as well as dowel center pins and a collection of wood dowels. Instructions included.
$37.99 Regular Choose Options OUT OF STOCK

Kreg Jig K5 Master System

2439214 Available: 2
Combines the popular Kreg Jig K5 with premium accessories, allowing a new option when using the Kreg Joinery system. The Master System adds a 3" Automaxx auto-adjusting face clamp, as well as a portable base to the Kreg Jig K5. Adding the portable base gives buyers yet another use for this handy jig; simplified setup for portable building and making repairs. Plus, the Kreg Jig K5 Master System includes downloadable plans to help get you started building projects as soon as you take this system home.
$169.99 Regular Choose Options OUT OF STOCK

Accu-Cut Cutting Guide

2609816 Available: 2
This Kreg Accu-Cut(TM) Circular Saw Guide Track System will produce results that exceed your expectations. This system rips, crosscuts and makes angled cuts up to 48" long in plywood, MDF, and other large panels. Transforms your circular saw into a high-performance, track-guided cutting system. Anti-slip/anti-chip strips hold the track securely in place without clamps while cutting, and the strips provide material support along the cut to prevent splintering of fragile plywood veneers.
$79.99 Regular Choose Options OUT OF STOCK

Kreg Tool #2 Pocket-Hole Screw Starter Kit 260 Piece

2800167 Available: 5
The Kreg pocket-hole screw starter kit provides a right-sized, right-priced assortment of the Kreg screws for Kreg joinery projects. The Pocket-Hole Screw Starter kit contains 260 Kreg screws in 6-popular sizes, making it a perfect choice if you are buying your first Kreg jig and just getting started building, or if you are looking for an assortment that's perfect for household repairs. The pocket-hole screw starter kit includes the most-commonly used Kreg screws, from 1 in. pan-head screws for building with 1/2 in. thick material, through 2-1/2 in. blue-kote screws for building bigger projects outdoors. All these screws are housed in a durable, divided case.
$19.99 Regular Choose Options OUT OF STOCK

Arbortech Mini Grinder Sanding Pad

FG011 Available:
The Mini-Grinder by Arbortech is the most versatile woodcarving power tool that you'll ever own! The Mini Grinder is so easy to use and lets you do everything from rough shaping to the finest details and even sanding. This tool's unique shape allow you excellent visibility and access to your workpiece.
$14.99 Regular Choose Options OUT OF STOCK

Kreg Zinc Pocket Hole Screws 1", #8 Coarse, Washer-Head, 1200 Count

M1075653 Available: 1
Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective blue-kote and stainless screw varieties. At first glance, a Kreg screw might not look much different from other wood screws. But don't be fooled: there's a lot of serious engineering built into them. Compare a Kreg screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building) and you can see that the Kreg screw has unique features that those other screws don't. Every one of those features is there to ensure that you get the best results possible.

-Self-tapping tip
-Case hardened Steel
-Square drive
-Flat-bottom head
-Smooth shank
-1200 count
$39.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Small Mortise Kit for DF700

M5085802 Available: 1
The Seneca Woodworking Small Mortise Kit bundles three of our most popular products together in one convenient kit that allows you to make mortises as small as 4mm with your Domino XL, and center properly on a variety of imperial plywood thicknesses.    The kit includes our RTS-500 Cutter Adapter for using DF500 cutters on your DF700, along with one of our "Domi-Shims" and our Imperial Thickness Gauge that allow quick fence adjustment for centering on plywood from  1/2 " to 1".

The Seneca Woodworking Domi-Shim is a machined aluminum shim that extends the lower travel limit of the Domino XL fence so that smaller offsets can be used.  This enables centering on smaller materials such as 1/2" or 3/4" plywood.

The Seneca Woodworking Imperial Thickness Gauge for DF700 works with the Domi-Shim to enable fast adjustment of the fence offset for centering on 1/2", 5/8", 3/4", 7/8", and 1" nominal ply thicknesses.  It installs in less than a minute using a Torx T10 bit (not included) and is a direct replacement for the metric thickness gauge included with your Domino DF700. The Imperial Thickness Gauge is CNC machined from Delrin material and manufactured in the USA.
$149.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Domi-Shim for DF700

M5085803 Available: 3
The Seneca Woodworking  Domi-Shim is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all the way to the cutter centerline, allowing centering on material thinner than the Domino XL fence's  lower travel limit would previously allow.   This shim can be used with the Domino XL in several ways:
-By itself, using a rule or setup block to adjust the fence to achieve the proper offset for a variety of material thicknesses, both imperial or metric.
-By itself with the Domino XL fence offset gauge set to "15mm." This creates the correct offset for centering a mortise on 1/2" nominal plywood.
-The Domi-Shim is machined from aluminum, black anodized and laser-engraved. Mounting hardware is included.
$36.99 Regular Choose Options OUT OF STOCK

Seneca Woodworking Cutter Adapter for DF700

M5085805 Available: 2
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700.  This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500.   This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth.
$69.99 Regular Choose Options OUT OF STOCK

Festool Domino Connector Cross Anchor/32

M6011325 Available: 3
Domino Connector Cross Anchor/32
$37.00 Regular Choose Options OUT OF STOCK

Festool DOMINO Connector Expansion Anchor

M6011326 Available: 2
DOMINO Connector Expansion Ancho
$37.00 Regular Choose Options OUT OF STOCK