System Three Yellow Resin Pigment

M9651530 Available: 2
Clear epoxy adhesives and coatings can be colored easily. System Three concentrated pigment pastes, dispersed in epoxy resins, can be added in any quantity.

Add the paste to the epoxy resin (Part A), then measure that mixture in the proper proportion with the hardener (Part B). If added according to these suggestions, the colored pigments will not detract from any of the properties of clear epoxy.

Epoxy Paste Pigments do not mix with WR-LPU Topcoat or SilverTip Yacht Primer.
$29.99 Regular Choose Options OUT OF STOCK

Poly Guard Fiberglass Cloth 1yd x 38" 8oz

M9651545 Available: 7
Fiberglass cloth is a woven material available in various sizes to allow custom strength, thickness, and weight in projects. Fiberglass cloth provides great strength and durability when layered with a resin to form a hardened composite. This six ounce cloth is 3.9 mils thick.
$13.99 Regular Choose Options OUT OF STOCK

RAM Mold Release Pint

M9651560 Available: 2
RAM Mold Release allows you to release your mold from it's casting with ease by acting as a barrier.
$10.99 Regular Choose Options OUT OF STOCK

RAM Mold Release Quart

M9651565 Available: 1
RAM Mold Release allows you to release your mold from it's casting with ease by acting as a barrier.
$13.99 Regular Choose Options OUT OF STOCK

Silicone Rubber Quart

M9651570 Available: 3
A tin catalyzed RTV silicone rubber with extremely high tear strength, high tensile strength, excellent chemical resistance and low shrinkage. Hardness is Shore A32. Light blue in colour.
$64.99 Regular Choose Options OUT OF STOCK

West System Epoxy Resin 105 Part 1 Gallon

M9652000 Available: 2
105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing." The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. Resin viscosity is approximately 1000 cP (centipoise) at 72?F (22?C).
$129.99 Regular Choose Options OUT OF STOCK

West System Epoxy Resin 105 Part 1 Quart

M9652003 Available: 4
105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing." The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. Resin viscosity is approximately 1000 cP (centipoise) at 72?F (22?C).
$57.99 Regular Choose Options OUT OF STOCK

West System Fast Hardener 205 27.5oz

M9652005 Available: 1
205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
$59.99 Regular Choose Options OUT OF STOCK

West System Fast Hardener 205 7oz

M9652010 Available: 1
205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority
of situations, at lower temperatures and to produce a rapid cure that develops its
physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating
properties. Not intended for clear coating.
$29.99 Regular Choose Options OUT OF STOCK

West System Slow Hardener 206 27.5oz

M9652015 Available: 3
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating
$59.99 Regular Choose Options OUT OF STOCK

Alumilite Super Plastic Casting Resin 28oz Tan

M9652150 Available: 2
Alumilite Super Plastic Casting Resin 10010

Cast your own parts. Liquid to solid in just 3 minutes
Applications: rapid prototyping, medical, hobby, craft
taxidermy, climbing holds, architectural, floor/driveway patching,
auto restoration, fishing lures, antiques, marine and much more.
Use with: silicone rubber RTV, alumilite "flex" molds, latex,plaster,
sealed wood, plastic, clay and any other non-porous materials.
$36.99 Regular Choose Options OUT OF STOCK

Aluminite Microballoons

M9652165 Available: 3
Alumilite Microballoons 40101

Reduce the amount of resin needed in large castings by filling your resin with Alumilite's Microballoons. These are hollow glass spheres that dramatically decrease the weight and increase the buoyancy of your cast piece.

Can be mixed up to 100% by volume max. Works wonderfully when casting a large artifact that needs to be lightweight or for fishing lures that need to float.

Quantity: 1 32-ounce plastic container
$8.99 Regular Choose Options OUT OF STOCK