Circular Saw Blades

CMT General Sawblade 10"

M6094758 Available: 2
For rip and crosscuts with exceptional finish. Excellent rip and crosscut on wood. Good on plywood.
To be used on adial arm saws, miter saws, table and special saws.
0.126 kerf thickness, 0.098 plate thickness, 18? hook angle, 20? Alternate Top Bevel Grind.
Micrograin carbide teeth to last longer and deliver smooth cuts.
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion.
$69.99 Regular Choose Options OUT OF STOCK

CMT Sawblade 50T 10"

M6094766 Available: 4
For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.
For radial arm saws, miter saws, table & special saws. Cut soft and hardwood, plywood & chipboard.
0.126 kerf + 0.087 plate thickness, 12? hook angle, 4 alternate teeth, 1 trapezoidal tooth Grind
Micrograin carbide teeth to last longer and deliver smooth cuts.
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion.
$69.99 Regular Choose Options OUT OF STOCK

CMT XTREME Non-Ferrous Metal Blade 10 in.

M6094768 Available: 2
Application: for heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions.  72 tooth
Machines: radial arm saws, miter saws, table and special saws.
Material: aluminum, brass, copper, PVC and non-ferrous metals.
$89.99 Regular Choose Options OUT OF STOCK

Wet Cutting Hot Dog Diamond Saw Blade 10"

M6095257 Available: 2
Wet cutting premium grade blade with .050" edge thickness for use with all tile saws. Designed for cutting porcelain and vitreous tile.
$79.99 Regular Choose Options OUT OF STOCK

Circular Saw Blade 10" 80T

M6097745 Available: 2
Thin kerf, .116", circular saw blade is designed to give glass-smooth finishes when crosscutting hard and soft woods. Alternate top bevel, 7,000 maximum rpm, .098 plate, +10 degree hook.
$89.99 Regular Choose Options OUT OF STOCK

Freud ATB Thin Kerf Miter Saw Blade 10" 60T

M6097755 Available: 2
This 10", thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5A? negative hook angle helps prevent the blade from being too aggressive and pushes the workpiece down and towards the fence. The .090 thin kerf blade removes less material than standard carbide blades, and thus requires less horsepower to produce equally good results. 5/8" arbor
$69.99 Regular Choose Options OUT OF STOCK

Dewalt Combo Blade 12" 2pk 32T & 80T

M6099675 Available: 2
Thin kerf saw blade for use with miter saws and table saws. Includes 2 blades, both 12" diameter, 1" round arbor,  alternate top bevel, .097" kerf. No.DW3123 (SKU 656.4629)  -5 degree hook angle, 32 teeth, general purpose blade for all-purpose cutting in natural wood, plywood and wood composites. No.DW3128 (SKU 678.1306) -5 degree hook angle, 80 teeth, fine crosscut blade for fine crosscuts in natural wood, plywood and wood composites.
$79.99 Regular Choose Options OUT OF STOCK

Tenryu Carbide Tipped Saw Blade 80T 8-1/2"

M6099745 Available: 2
8-1/2" 80T Power Tool Series Blade

8-1/2" - 80 tooth - .087 kerf - 10 degree rake

ATAF - Alternate Top Alternate Face. Extra sharp cutting tips reduce load on saws.  Face beveling diverts cutting load left and right, instead of straight on.
For extra-clean cuts in wood and thin products.

Exceptional features and superior quality, Thin Kerf
TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.
BLADE FEATURES:
    * Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
    * High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
    * Aggressive rake angles for maximum cutting speed and efficiency.
    * Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
    * Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
    * Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
    * Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
    * Can be resharpened for extended blade life.
$59.99 Regular Choose Options OUT OF STOCK

Tenryu Diamond Tipped Saw Blade 5T 7-1/4"

M6099747 Available: 1
The Tenryu BP-18505 Board Pro Plus 7-1/4-Inch, 5-Tooth Circular Saw Blade is used to cut fiber-cement board. Since fiber-cement board is a very abrasive material that wears down normal carbide very quickly Tenryu has incorporated special grade carbide tips in their Board-Pro Series. The Board-Pro Plus series takes it one step further by using PCD (poly-crystalline diamond) for an even stronger blade and longer cutting life. Highlights: Perfectly-tensioned, hardened tool-steel plates for flat, true run Select quality PCD (Poly-Crystalline Diamond) faced tips for longer life Extra long blade life Less dust than traditional blades produce
Features: Applications: Single/Stacked Sheets, Fiber Cement Cutting Arbor Size: 5/8" Blade Diameter: 7-1/4" For Use With: Circular Saw Hook Angle: 12 Kerf: 0.091 Material: Steel Number Of Teeth: 5 Operating Speed: 8300 Tip Material: Poly-Crystalline Tooth Grind: FTG
$69.99 Regular Choose Options OUT OF STOCK

Tenryu Table Saw Ripping Blade 24T 10" IW-25524CBD1

M6099748 Available: 2
Tenryu IW-25524CBD1 10" Table Saw Ripping Blade 24T 5/8 Arbor
$59.99 Regular Choose Options OUT OF STOCK

Tenryu Board Pro Plus Fiber Cement Blade 10"

M6099749 Available: 2
Highlights: Diameter: 10" Teeth: 6 Perfectly-tensioned, hardened tool-steel plates for flat, true run Select quality PCD (Poly-Crystalline Diamond) faced tips for longer life Extra long blade life Less dust than traditional blades produce Applications: Single/Stacked Sheets, Fiber Cement Cutting Arbor Size: 5/8" For Use With: Miter Saw Hook Angle: 8 Kerf: 0.098 Material: Steel Number Of Teeth: 6 Operating Speed: 5870 Tip Material: Poly-Crystalline Tooth Grind: FTG
$89.99 Regular Choose Options OUT OF STOCK

Tenryu PRF 30560DK Ferrous Metal Cutting Saw Blade 60T 12"

M6099754 Available: 2
Tenryu PRF-30560DK 12" Ferrous Metal Cutting Saw Blade 60T 1" Arbor
$99.99 Regular Choose Options OUT OF STOCK