West System Slow Hardener 206 7oz

M9652170 Available: 4
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating
$29.99 Regular Choose Options OUT OF STOCK

West System Mini Pump Kit

M9652505 Available: 4
PUMPS are for convenient and accurate dispensing of West System #105 resin and #205 or #206 hardeners. Calibrated to deliver proper working ratio with one stroke from each pump. Made of durable polypropylene. Can be left mounted in cans. Kit includes one Resin pump and two Hardener pumps sizes ABC
$26.99 Regular Choose Options OUT OF STOCK

West System G/flex Epoxy 8oz

M9652506 Available: 4
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/flex the ability to make structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with West System fillers and additives, and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs
$35.99 Regular Choose Options OUT OF STOCK

Marine Premium Gel-Kote White 16oz

M9652605 Available: 3
Evercoat Marine Premium Gel-Kote White 105673\EVCT
Use Ever coat Premimum Gel-Kote to repair and conceal gouges, chips, scrapes and deep scratches in fiberglass gel coat finishes. Gel-Kote has a non-run, non-sag formula for rigid, flexible polyester resins to produce resiliency and toughness. Add gelcoat/polyester resin colorant to tint to desired color.
$36.99 Regular Choose Options OUT OF STOCK

Bondo White Cream Hardener 2.75oz

M9652905 Available: 2
Used as an activant in BHS All Purpose Putty, BHS Metal Repair Compound, BHS Concrete, Brick and Stucco, and BHS Wood Filler.
$7.99 Regular Choose Options OUT OF STOCK

System Three Black Resin Pigment

M9651510 Available: Out of stock
Clear epoxy adhesives and coatings can be colored easily. System Three concentrated pigment pastes, dispersed in epoxy resins, can be added in any quantity.

Add the paste to the epoxy resin (Part A), then measure that mixture in the proper proportion with the hardener (Part B). If added according to these suggestions, the colored pigments will not detract from any of the properties of clear epoxy.

Epoxy Paste Pigments do not mix with WR-LPU Topcoat or SilverTip Yacht Primer.
$12.99 Regular Choose Options OUT OF STOCK