Sanding

Angled Sanding Sponge Fine Grit 1"

1024017 Available: 11
3M Sanding Sponge CP040-12-CC Single Angle, 4.875-Inch by 2.875-Inch by 1-Inch, Fine grit. For detailed area. Rinse and reuse. Use wet or dry. For large areas and detail sanding. 3M(TM) Sanding Sponges are designed for wet or dry sanding on wood, paint, metal, plastic or drywall. Use this fine-grit sponge for smoothing patch and repair on walls and for between coat finishing to improve adhesion of additional coatings. This sponge features conventional 3M abrasives and is made with durable, flexible foam. Sanding is an integral step in preparing a surface to receive a coating. For the best sanding results, sand with the grain of the surface and work through a sequence of grits, from coarse to very fine, skipping no more than one grit between each sanding step. 3M sanding sponges are available in medium, fine and extra fine grits.
$3.99 Regular Choose Options OUT OF STOCK

3M AP Sanding Sponge Super Fine

1024025 Available: 22
3M(TM) Contour Surface Sanding Sponge is ideal for sanding wood, paint, metal, plastic and drywall. The contoured sponge can be used for either dry or wet sanding and can be rinsed and reused. Extremely flexible, softback.
$3.99 Regular Choose Options OUT OF STOCK

3M AP Sanding Sponge Fine 4.5"x 5.5"

1024033 Available: 9
3M(TM) Contour Surface Sanding Sponge is ideal for sanding wood, paint, metal, plastic and drywall. The contoured sponge can be used for either dry or wet sanding and can be rinsed and reused. Extremely flexible, softback.
$3.99 Regular Choose Options OUT OF STOCK

3M All Purpose Sanding Sponge Medium

1024041 Available: 23
For dry or wet sanding wood, paint, metal, plastic, and drywall. Contoured with extremely flexible, soft back for sanding hard-to-reach surfaces like corner beads, molding, and spindles. Rinse to reuse.
$3.99 Regular Choose Options OUT OF STOCK

3M Sandblaster Sanding Sponge 60

1180926 Available: 14
SandBlaster(TM) sanding sponge,Used for fast paint and varnish removal,Ideal for use on wood and metal,Electrostatic coated silicone carbide mineral,Increased durability and work life,Size: 3-3/4 x 2-5/8 x 1,GRIT 60,COLOR Green
$3.99 Regular Choose Options OUT OF STOCK

3M Sand Blaster Sanding Sponge 100 Grit

1180959 Available: 7
These sanding sponges allow easy surface preparation for bare wood, metal or drywall. Made of an electrostatically coated ceramic aluminum oxide mineral blend for increased durability and worklife.
$3.99 Regular Choose Options OUT OF STOCK

3M Sandblaster Sand Sponge 150

1180967 Available: 10
3M SandBlaster Sanding Pads or Standing Sponges- Description: 150 grit sanding spongeThese last longer and sand faster than 3M conventional pads of comparable grit.Using proprietary constructions and manufacturing technology, 3M has created pads which maintain their inherent, high-performing cutting abilityIn addition, each has been coated to resist clogging and build-upChoose the grit level that's right for your needs:60--course for moderate stripping; ideal for removing old paint, varnish, and clear-coat finishes on wood and metal100--medium for surface leveling; ideal for preparing bare wood, metal, and drywall surfaces prior to first coat of finish150--medium for surface smoothing; ideal for preparing bare wood, metal, and drywall surfaces prior to first coat of finish180--fine for sanding between coats; ideal for preparing freshly coated wood or metal surfaces prior to next coatPads measure 4 1/2 in. x 5 1/2 in. x 3/16 in. - Recommended for round or highly contoured surfacesSponges measure 3 3/4 in. x 2 5/8 in. x 1 in. - Recommended for flat or slightly contoured surfaces.
$3.99 Regular Choose Options OUT OF STOCK

Sand Blaster Sanding Sponge 180 Grit

1180975 Available: 8
3M(TM) SandBlaster(TM) Between Coats Sanding Sponges, 20907-180, Fine 180, Sleeved, 2.5-Inch by 3.75-Inch by 1-Inch , 12/cs, Open Stock. The 3M(TM) SandBlaster(TM) Between Coats Sanding Sponge is ideal for preparing freshly coated wood or metal surfaces prior to the next coat.Block sanding sponges are recommended for flat or slightly contoured surfaces. 3M(TM) SandBlaster(TM) coarse sanding sponges cut fast, last long and are clog resistant.
$3.99 Regular Choose Options OUT OF STOCK

3M Wet/Dry Sandpaper 1500A 9"x 11"

1201102 Available: 40
Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
Regular Choose Options OUT OF STOCK

3M Sandblaster Sanding Tool Large

1238815 Available: 7
Designed to work with SandBlaster flexible sanding and finishing pads. Has a ratcheting, rotating handle.
$10.99 Regular Choose Options OUT OF STOCK

SandBlaster Sanding Sponge 220

1563337 Available: 3
3M SandBlaster ultra flexible 220 grit sanding sponge for between coat sanding on freshly coated surfaces to level minor imperfections. Best used on paint, wood and metal. This unique sponge channels dust away from the sanding surface is clog resistant and lasts 5X longer. Use the pattern side for detail sanding and superior conformability.
Lasts 5X longer than 3M conventional sanding sheets
Channels dust away from sanding surface
Use pattern side for detail/contour sanding
Use regular side for flat sanding
Clog resistant for longer sponge life
Use wet or dry
For the best results, sand with the grain of the surface and work through a sequence of grits, from coarse to very fine, skipping no more than 1 grit between each sanding step (other grits not included)
Used on paint, wood, metal and drywall
$5.99 Regular Choose Options OUT OF STOCK

SandBlaster Sanding Sponge 80

1563352 Available: 1
3M(TM) SandBlaster(TM) ultra flexible 8 grit sanding sponge for between coat sanding on freshly coated surfaces to level minor imperfections. Best used on paint, wood and metal. This unique sponge channels dust away from the sanding surface, is clog resistant and lasts 5X longer. Use the pattern side for detail sanding and superior conformability.
Lasts 5X longer than 3M conventional sanding sheets
Channels dust away from sanding surface
Use pattern side for detail/contour sanding
Use regular side for flat sanding
Clog resistant for longer sponge life
Use wet or dry
For the best results, sand with the grain of the surface and work through a sequence of grits, from coarse to very fine, skipping no more than 1 grit between each sanding step (other grits not included)
Used on paint, wood, metal and drywall
$5.99 Regular Choose Options OUT OF STOCK