Festool Guide Rail 32"

M6010473 Available: 2
32" Guide Rail FS 800. Use the FS 800 Guide Rail (32 inches) with the Festool TS Plunge cut saw to make precision cuts up to 26 inches long.
$92.00 Regular Choose Options OUT OF STOCK

Festool Guide Rail 55" FS 1400

M6010472 Available: 7
55" Guide Rail FS 1400. Use the FS 1400 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long
$145.00 Regular Choose Options OUT OF STOCK

Festool 6 In. White Viles Discs 150mm 10 Pack

M6016509 Available: 2
Use Vlies fibrous abrasives just before wiping off excess oil to help increase surface penetration for a more even finish. Use Vlies Green with your first coats, and Vlies White during final application. For use with Festool 150mm round pad sanders.
$26.00 Regular Choose Options OUT OF STOCK

Festool 6 In. Green Viles Discs 150mm 10 Pack

M6016508 Available: 2
Use Vlies fibrous abrasives just before wiping off excess oil to help increase surface penetration for a more even finish. Use Vlies Green with your first coats, and Vlies White during final application. For use with Festool 150mm round pad sanders.
$26.00 Regular Choose Options OUT OF STOCK

Festool Track Saw TS75 EQ F Plus

M6012222 Available: 2
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back. When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor. Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
$660.00 Regular Choose Options OUT OF STOCK

Festool Syslite Duo Plus

M6012111 Available: 2
Jobsite lighting is more than just putting light in a room. It is about truly seeing the surface you are working on in the correct color without hot spots in the center. The SYSLITE DUO is a hard-wired AC lighting solution with 8000 Lumens projecting an evenly diffused light over 1800 with a color temperature of 5000 Kelvin. Being designed for the jobite the SYSLITE DUO is impact and water resistant meeting IP 55 standards for dust and water intrusion. Optional tripod, ST DUO 200, provides a firm and stable base that is designed to withstand years of service in the field. Couple that with the LED service life of 10,000 hours, the SYSLITE DUO will provide unmatched lighting for many years to come.
$300.00 Regular Choose Options OUT OF STOCK

Festool Guide Rail FSK670

M6012106 Available: 1
This guide rail is compatible with the HK 55 and HKC 55. Cutting length: 26.38 in. (670 mm)
$210.00 Regular Choose Options OUT OF STOCK

Festool Track Saw TS55 REQ F Plus

M6012220 Available: 3
The TS REQ is not your standard circular saw. With its accuracy and versatility, a better comparison would be to the most advanced table saws, miter saws or panel saws available. Add in its incredible portability and unbelievable ease of use, and you have a precision-cutting solution like no other, at home in the highest-end cabinet shop as well as an onsite remodel. With the addition of micro-adjustable depth controls and a flat housing for flush-cutting against walls or adjacent surfaces, the TS 55 REQ is our most advanced plunge cut saw ever, which is saying a lot. When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
$590.00 Regular Choose Options OUT OF STOCK

Festool Remote control CT-F I/M Set

M6012418 Available: 2
The combination of Bluetooth module on your Festool dust extractor and remote control on the extractor hose saves you a trip to the extractor: Simply start dust extraction from the hose using the remote control. Ideal for small, occasional cleaning tasks, simply switch to cleaning mode, even when the dust extractor is in AUTO mode. The Bluetooth module on the mobile dust extractor communicates with the Festool Bluetooth battery packs (sold separately) in addition to the new remote control. These battery packs ensure that even a cordless tool starts the mobile dust extractor automatically when switched on. This now enables you to benefit from Festool's entire dust-free system when working with Festool cordless products too.
$80.00 Regular Choose Options OUT OF STOCK

Festool Hose Sleeve 3.5M In SYS 3

M6012010 Available: 1
Antistatic Dust Extraction Hose with integrated sleeve protects the surface and edges of the material being sanded. In Systainer SYS 3. 11.5' (3.5m)

Equipped with an integrated Plug It Cord and sleeve, this tapered hose is the ideal partner for the new ETS EC sanders as well as many of our existing sanders. Integrated 16 AWG Plug It Cord is compatible with many Festool tools. The sleeve shrouds the hose to help prevent the rib of the hose from catching on materials which may damage the surface. The sleeve also allows the hose to easily navigate over edges of work tables for easier work flow while sanding.

Supplied with a Systainer SYS 3.
$250.00 Regular Choose Options OUT OF STOCK

Festool CT 36E AC Dust Extractor

M6011900 Available: 1
The CT 36 E AC has an autoclean feature especially equipped for the Festool Planex LHS 225 Drywall Sander. Sanders are known for creating a lot of dust very quickly. So the filters with normal dust extractors would clog creating excessive dust build-up and minimum suction. With this Festool dust extractor, there is an automatic cleaning of the filter as you continue to work so there are no interruptions. Its ability to circulate huge amounts of suction for the dust and the continued use of the filter without any interruptions is time and money-saving. The CT 36 E AC includes an ultra-light weight, flexible hose for use with the Planex Drywall sander and other tools that accept a 36mm hose. The low center of gravity, integrated center handle, and extra large wheels make navigating rough terrain in the shop or jobsite easy without tipping over. Festool offers a comprehensive three-year limited warranty and ensures the highest level of quality for all of their power tools. Features: New Smooth tapered suction hose New and improved SYS-Dock Hose Garage New cord holder Tool triggered or manual on-off switch with smooth start up and shut off delay Replaceable Filter Bag Integrated cleaning device cleans the filter quickly Stepless electronic suction control Wet and dry extraction without complicated changeover Integrated storage Blower port Antistatic equipment protects from electrostatic charging Flat area for tools or systainer stacking Locking rear brakes Specifications: Container Capacity: 9.5 gal Dimensions (L X W X H) 24.8" x 14.4" x 23.4" (630 x 365 x 596mm) Filter Bag Capacity 8.9 gal Maximum Suction Force 137 CFM (3,900 l/min) Noise Level: 62-72 db(A) Power Consumption 350-1,200 watts/2.9-10 amps, 120v AC Static Water Lift 96" (24,000 Pa) Weight: 29.8lbs. (13 kg) Includes: CT 36 E AC Dust Extractor Filter Self-Cleaning Filter Bag Cord Wrap Hose Garage 36mm Antistatic Suction Hose, 1(36mm) x 11.5'(3.5M)
$915.00 Regular Choose Options OUT OF STOCK

Festool D 36x7,0m-AS/CT Hose

M6012439 Available: 2
The new suction hose: Smooth elastic, tapered - with smooth outer skin for significantly improved handling, a longer service life, and increased suction power.
Festool's Antistatic hose design helps you work cleaner by preventing dust from accumulating on the exterior of the hose. It helps you work more safely by preventing static discharge or shocks. And you'll work more efficiently with a system that prevents clogging due to particulate buildup inside the hose. A durable, pliable design withstands heavy use and prevents kinking, for longer service life and more efficient work.
$250.00 Regular Choose Options OUT OF STOCK

Festool Non-Antistatic Hose Reducer Adapter

NASRTADP Available:
Hose Sleeve, Rotating Connector for Non-antistatic Hose. For attaching Festool Non-Antistatic hoses to the inlet of the CT 22 and CT 33 Dust Extractors
Regular Choose Options OUT OF STOCK

Festool Antistatic Rotating Adapter

ASRTADP Available:
Hose Sleeve, Rotating Connector for Antistatic Hose. For attaching Festool Antistatic hoses to the inlet of the CT 22 and CT 33 Dust Extractors
$27.00 - $32.00 Regular Choose Options OUT OF STOCK

Festool Coarse Polishing Pad RO90

M6012157 Available: 2
Coarse Polishing Pad RO90
$34.00 Regular Choose Options OUT OF STOCK