Circular Saw Blades

Tenryu Ferrous Blade 10" PRF-25550D

M6099757 Available: 1
Tenryu PRF-25550D 10" Ferrous Metal Cutting Saw Blade 50T 1" Arbor
$89.99 Regular Choose Options OUT OF STOCK

Tenryu Ferrous Metal Cutting Saw Blade 12"

M6099759 Available: 2
Specifications - Arbor: 1in Grind: TCG Rake: 0 Kerf: 0.098 RPM: 2000 Type of Machine: Dry Cut Saws Type of Material: Ferrous
$99.99 Regular Choose Options OUT OF STOCK

Tenryu Sawblade Combo 40T 10"

M6099760 Available: 1
The highest quality combination blade you can buy
Rip or cross-cut in thick or thin materials
Fully-hardened, expertly-tensioned tool steel body
A new grade of extra hard carbide resists both abrasive and chemical wear better
Resin bond-filled expansion slots to absorb any vibration and for quieter cutting
$94.99 Regular Choose Options OUT OF STOCK

Tenryu Rapid Cut Blade 12" RS-30548CBN

M6099762 Available: 1
Tenryu RS-30548CBN 12" Rapid-Cut Industrial Saw Blade 48T 1" Arbo
$59.99 Regular Choose Options OUT OF STOCK

Tenryu Rapid Cut Blade 12" RS-30536CBN

M6099763 Available: 2
Tenryu RS-30536CBN 12" Rapid-Cut Industrial Saw Blade 36T 1" Arbo
$59.99 Regular Choose Options OUT OF STOCK

Tenryu Aluminum Cutting Blade 12"

M6099764 Available: 1
12" 100T Alumi-Cut Series Saw Blade

12" - 100 tooth - .110" kerf - -5 degree rake
TCG - Triple Chip Grind - center of kerf is cut first.  Then FLAT TOP RAKER cleans out chips and widens the cut.  Commonly used for longer sharp-life in hard materials.
For thin stock non-ferrous and plastics on miter or RAS.
TENRYU'S best value for your non-ferrous metal cutting needs. Thin Kerf. Very Economical.
The Alumi-Cut Series offers true quality and affordability.
These blades are available in a wide variety of sizes to fit most popular job site and shop saws. Excellent results in aluminum, copper, brass, bronze and other non-ferrous metals. Even works well in many plastics. Also good for woodworking and plastic cutting when needed. Resharpenable for long life, the Alumi-Cut blades will help you improve your bottom line!
These blades are also an excellent choice for cutting laminated flooring (i.e.: PergoR, etc.) with slide-miters or table saws.
EACH BLADE FEATURES:
    * Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
    * Appropriate triple-chip grind pattern for non-ferrous metals.
    * Quality carbide ground to precision.
$99.99 Regular Choose Options OUT OF STOCK

Tenryu Alumi-Cut Clean Non-Ferrous Blade 80T 5/8"

M6099961 Available: 1
10" 80T Alumi-Cut Series Saw Blade

10" - 80 tooth - .094" kerf - -5 degree rake
TCG - Triple Chip Grind - center of kerf is cut first.  Then FLAT TOP RAKER cleans out chips and widens the cut.  Commonly used for longer sharp-life in hard materials.
The hugely popular Alumi-Cut blade for clean non-ferrous work.
TENRYU'S best value for your non-ferrous metal cutting needs. Thin Kerf. Very Economical.
The Alumi-Cut Series offers true quality and affordability.
These blades are available in a wide variety of sizes to fit most popular job site and shop saws. Excellent results in aluminum, copper, brass, bronze and other non-ferrous metals. Even works well in many plastics. Also good for woodworking and plastic cutting when needed. Resharpenable for long life, the Alumi-Cut blades will help you improve your bottom line!
These blades are also an excellent choice for cutting laminated flooring (i.e.: PergoR, etc.) with slide-miters or table saws.
EACH BLADE FEATURES:
    * Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
    * Appropriate triple-chip grind pattern for non-ferrous metals.
    * Quality carbide ground to precision.
$79.99 Regular Choose Options OUT OF STOCK

Tenryu Carbide Tipped Saw Blade 80T 10"

M6099965 Available: 2
Specifications - Arbor: 5/8in Grind: TCG Rake: 10 Kerf: 0.118 RPM: 5870
$84.99 Regular Choose Options OUT OF STOCK

Tenryu Sawblade 9" 40TPI 5 Rake

M6099968 Available: 1
9" 40T Power Tool Series Saw Blade

9" - 40 tooth - .087 kerf - 5 degree rake
ATAF - Alternate Top Alternate Face. Extra sharp cutting tips reduce load on saws.  Face beveling diverts cutting load left and right, instead of straight on.
Our Power Tool Series blade for 9" miter or table saws.
Exceptional features and superior quality, Thin Kerf
TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.
BLADE FEATURES:
    * Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
    * High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
    * Aggressive rake angles for maximum cutting speed and efficiency.
    * Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
    * Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
    * Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
    * Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
    * Can be resharpened for extended blade life.
$59.99 Regular Choose Options OUT OF STOCK

Makita B-07353 Carbide Tipped Blade 165mm x 20mm

M6630608 Available: 2
-High-grade carbide tips for longer durability
-Engineered for smoother cutting
-Fully hardened and expertly hand-tensioned steel saw plates for true cuts -For use with Makita 6-1/2" Plunge Circular Saw (model SP6000J)
$54.99 Regular Choose Options OUT OF STOCK

Makita A-95934 48T Carbide Tipped Miter Saw Blade 8-1/2"

M6635060 Available: 2
-Ultra-thin kerf carbide-tipped design provides smoother cuts with minimal material loss
-Fully hardened and expertly tensioned steel saw plates for true cuts
-ATB (Alternate Top Bevel) tooth design for fast and clean cuts
-Designed to work with Makita and most major competitor brand 8-1/2-inch Miter Saws
-8-1/2-inch 48T Carbide-Tipped Miter Saw Blade
$59.99 Regular Choose Options OUT OF STOCK

Freud LU74R010 Thin Kerf Ultimate Cut‑Off Blade 10"x 80T

M6083306 Available: Out of stock
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freuds unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.
$79.99 Regular Choose Options OUT OF STOCK