Kreg Zinc Pocket Hole Screws 1", #7 Coarse, Pan-Head, 500 Count

M6072268 Available: 4
This 1" coarse thread, #2 square drive pan head screw works well in 1/2" thick, softer materials such as plywoods and composites. The deep recess, pan head of this screw provides excellent driver engagement and is popular in building drawer boxes from 1/2" plywood. The smaller profile of the pan head helps to seat the screw below the surface of the material. The screw features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance. For maximum rust resistance, look to our Sun-Seal coated weather resistant screws.
$21.99 Regular Choose Options OUT OF STOCK

Kreg SML‑F150‑500 Pocket Screws 1‑1/2" #7 Fine

M6072291 Available: 2
Kreg SML-F150-500 Fine Pocket Hole 1-1/2-Inch #2 Square-Drive Washer-Head Screws (500 ct) work well in 3/4" thick, hardwood material such as oak, maple, hickory, cherry and walnut. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.
$17.99 Regular Choose Options OUT OF STOCK

Kreg SML‑C150‑500 Pocket Screws 1‑1/2" #7 Course

M6072293 Available: 10
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
This 1-1/2" coarse thread, #2 square drive washer head screw works well in 1" thick, softer material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its' own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a zinc finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.
$14.99 Regular Choose Options OUT OF STOCK

Kreg Pocket Hole Screws 1-1/4", #7 Fine, Washer-Head, 1000 Count

M6072307 Available: 7
For a wide variety of indoor projects with limited exposure to the elements. Provide adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
The Kreg 1-1/4-Inch No. 7 Fine Pocket Hole Screws with Pan-Head is ideal for 3/4-inch thick hardwood work pieces. The washer head prevents overdriving in pocket bottoms, which is especially critical in composite and plywood work pieces. The self-tapping type 17 auger tip eliminates the need to predrill, and its larger diameter steel shank creates a nearly unbreakable screw. The bronze-colored finish and dry-lubricant coating improves driving torque and rust resistance. This pack includes 1,000 hole screws.
$26.99 Regular Choose Options OUT OF STOCK

Kreg Maxi Loc Washer Head Pocket Hole Screws 1-1/2" #7 Fine

M6072311 Available: 3
This 1-1/2" fine thread, #2 square drive washer head screw works well in 3/4" thick, hardwood material such as oak, maple, hickory, cherry and walnut. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.
$29.99 Regular Choose Options OUT OF STOCK

Kreg Screws Maxi-Loc Course Thread 1-1/2" #8

M6072313 Available: 2
The Kreg 1-1/2-Inch #8 Coarse Pocket Screws feature Maxi-loc washer heads and come in a 1,000-pack. The washer head of this screw sports a wide load-bearing surface and will not overdrive into the bottom of the pocket. This is an especially useful feature when working in softer materials such as plywood and composites. The screws also feature a type 17 auger tip that self-taps its own hole, eliminating the need to pre-drill in even the hardest materials. The screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. The screws have a bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.
$29.99 Regular Choose Options OUT OF STOCK

Kreg KJMICRODGB Jig Micro Pocket Drill Guide System

M6072615 Available: 2
-Micro pocket drill guide works in both the K3 and K4
-Kreg Jig bench top base features black color to differentiate from standard drill guide
-Reduced width lets you drill two holes across extremely narrow stock down to 1
-Wide screw heads seat well below material surface in thin stock
-Perfect for creating fully pluggable pocket-holes in 1/2" thick material
$54.99 Regular Choose Options OUT OF STOCK

Kreg Tool Rip Cut Cutting Guide

M6072685 Available: 4
Great projects start with high-quality cuts, and you can make those cuts more easily than you ever imagined using your circular saw plus the Rip-Cut Circular Saw Edge Guide. The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need. The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want up to 24" using the built-in measuring scale and then make your cut. With a built-in measuring scale, you don't have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself. The Rip-Cut is very easy to use. Simply mount your saw to the universal sled it accepts most left blade or right-blade saws and then slides the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You will get straight, accurate, repeatable cuts easily every time.
$39.99 Regular Choose Options OUT OF STOCK

Sona Hand Held Metal Detector

M6080101 Available: 2
-Overall dimensions: 16" x 3-1/2" x 1-1/2"
-360-degree Detection area sensor
-LED indications; Audio tone changes per metal size
-[Low/On] Momentary button (helps save battery)
-3.5mm Headphone jack for noisy environments
$39.97 Regular $59.99 Choose Options OUT OF STOCK
ClearanceButton 138x37 sku

Kreg Square Cut Cutting Guide

M6082600 Available: 4
The Square-Cut allows you to quickly and accurately crosscut boards up to 12" (305mm) wide. Whether you're using a circular saw or a jigsaw, the Square-Cut(TM) ensures great results. Just position the Square-Cut against the edge of your board and the built-in guide arm ensures that it sits perfectly square.

Plus, the guide arm is adjustable, so you can set it to match the offset between the edge of the saw base and blade. Simply position the end of the guide arm on your cut line, and the Square-Cut will be automatically aligned to guide your saw through the cut. That eliminates the guesswork of having to align your blade by eye, and then hold the keep it on the line as you cut. With the Square-Cut, you'll get great crosscuts every time.
$14.99 Regular Choose Options OUT OF STOCK

Robert Larson Tapering Jig

M6085751 Available: 2
Twenty four inch aluminum jig is reversible for right or left hand use, and adjusts up tp fifteen degrees (three inches per foot).  Designed so the jig rides up against your fence while the tapered side of the jig hooks the edge of your piece.
$29.99 Regular Choose Options OUT OF STOCK

King Arthur Tools Lancelot Blade 7/8"x 22T

M6090138 Available: 1
This 22-teeth, 7/8-inch arbor solves the problem of trenching, notching, shaping or carving wood and many other materials. Has double the number of chainsaw teeth for smoother cut. Useful for everything from construction to woodcarving. Excellent for electricians, plumbers, carpenters, remodelers, demolition work, for log homes, Do It Yourselfers, woodflooring, small stump removal, ice, strawbales, fiberglass, lime, bone, hard rubber, cows hooves, and all kinds of hard and soft woods. Cuts and shapes wood like butter. Single blades fit most 4-inch (100mm) , 4-1/2-inch (115mm) or 125mm angle grinder. Fits most popular angle grinders: Bosch, B&D, Craftsman, DeWalt, FEIN, Hitachi, Makita, Milwaukee, Porter Cable. 1/4-inch pitch 0.050 gauge chain.
$49.99 Regular Choose Options OUT OF STOCK