Power Tool Accessories

Freud SS100 Dado Shim Set 5/8" Bore

M6083377 Available: 2
The Freud SS100 5/8-Inch Bore Dado Shim Set expands the scope of your dado set, letting you create dadoes, slots, and grooves in thin materials with widths under one inch. Perfect for use with plywoods and laminates, the set's 10 high-quality shims allow for a wide range of kerf adjustments, starting with widths as small as 0.004 inches and up to 0.096 inches in 0.004-inch increments
$15.49 Regular Choose Options OUT OF STOCK

Freud SD508 Super Dado Stack 8"

M6083379 Available: 2
For table or radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. Cuts dadoes in everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super-smooth dado bottom and the flexibility of an adjustable dado to handle undersized plywood. Anti-kickback design. Eliminated hub, added extra thick and stiff outside plate and gullet designed for max chip ejection to prevent chip buildup within stack. 3/32" thick chipper for adjusted cut widths in 1/32" increments, doubles the number of slot widths available, and fits plywood 1/32" undersized from nominal width with less shimming. Shim set included for fine adjustments.
$199.99 Regular Choose Options OUT OF STOCK

Freud Stablilizer 5/8" Bore

M6084540 Available: 2
When making a high precision cut, any amount of rim vibration can mean the difference between a masterpiece and scrap. These sets of saw blade stabilizers are precision machined and balanced to give an added amount of stability. Freud Stabilizer sets not only improve the cut, but also make the saw cut quieter, and extend its cutting life between sharpenings. These Stabilizer sets can be used on blades 7" diameter, and larger. Stabilizers should only be used on stationary saws and should never be used on hand held portable saws. Stabilizers should only be used on stationary saws and should never be used on hand held portable saws.
$21.90 Regular Choose Options OUT OF STOCK

Freud Sawblade 8"x 5/8"

M6084550 Available: 3
-8 inch 64TPI TCG 5/8 inch arbor
-Carbide tipped for a superior cut
-Great blade for laminates, melamines
-Excellent for soft & hard woods
-Red Perma-SHIELD coating reduces friction
$89.99 Regular Choose Options OUT OF STOCK

Freud Saw Blade LU82M008 TCG 48T 8"x 5/8"

M6085395 Available: 2
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range ins 1/2" - 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish. Application: Long Life In Stacked Chipboard And Manmade Materials.
$64.99 Regular Choose Options OUT OF STOCK

Freud Saw Blade LU82M010 TCG 60T 10"x 5/8"

M6085400 Available: 2
Thin kerf, .126" , circular saw blade. Thick MicroGrain carbide tips. Laser cut blade bodies and expansion slots. Kickback reducing design. TCG (Triple Chip Grind) cutting tip configuration. Used to cut stacks of man-made wood products, hardwood and softwood, 7,000 rpm, +10 degree hook angle, .087" plate.
$79.99 Regular Choose Options OUT OF STOCK

Freud Double Laminate 10"x 80"

M6085418 Available: 2
Designed to give long life and excellent finish on the top and bottom of laminates, melamines & veneered plywood. Laser-cut anti-vibration design yields the plate acoustically dead Reduces the sideways movement of the cutting edge to prevent chipping in man made materials such as laminates. Dramatically extends cutting life and finish. No Scoring blades needed! Application: For Ultra Long Life In Double Sided Man Made Materials
$109.99 Regular Choose Options OUT OF STOCK

Freud Solid Surface Saw Blade 10"

M6085422 Available: 2
This blade features teeth with a specially designed triple chip grind for leaving swirl-free cuts in solid surface materials such as Dupont, Corian, Wilsonart Gibralter and SSV Fountainhead.laser-cut anti-vibration slots reduce the sideways movement of the cutting edge against the solid surface material, dramatically extending cutting life.this ultimate solid surface blade, there is no need for stabilizers. Application: Heavy-Duty Solid Surfacefor Swirl & Burn Free Cuts
$104.99 Regular Choose Options OUT OF STOCK

Freud Glue Line Rip Saw Blade 10"

M6085434 Available: 2
10" 30T Glue Line Ripping Blade Glue Line Ripping. This blade's specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.
$69.99 Regular Choose Options OUT OF STOCK

Freud LM75R010 Industrial Thin Kerf Glue Line Rip Saw Blade 10"

M6085435 Available: 2
This blade's specially designed triple chip grind tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser-cut anti-vibration slots that practically eliminate the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.
$59.99 Regular Choose Options OUT OF STOCK

Freud SD306 Safety Dado 6"

M6086260 Available: 2
Clean edges, square shoulders, and flat bottoms: the Freud SD306 Six-Inch Safety Dado Set cuts with ultimate precision, so you can achieve them all. Boasting razor-sharp outside blades, thick MicroGrain carbide tips, and an anti-kickback design, this is your go-to set for safely and efficiently creating dadoes and grooves spanning 1/4 to 13/16 inch. This versatile kit cuts a wide range of materials from hardwood to laminate.
$149.99 Regular Choose Options OUT OF STOCK

Freud Industrial Combination Saw Blade 10"x 5/8" 50T

M6086430 Available: 2
In many woodworking shops, one saw must serve multiple purposes such as rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. This 10" combination carbide-tipped blade meets the challenge. The blade's groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting, plus a large gullet for effective chip clearance. The blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers.
$64.99 Regular Choose Options OUT OF STOCK