Power Tool Accessories

Freud SD306 Safety Dado 6"

M6086260 Available: 2
Clean edges, square shoulders, and flat bottoms: the Freud SD306 Six-Inch Safety Dado Set cuts with ultimate precision, so you can achieve them all. Boasting razor-sharp outside blades, thick MicroGrain carbide tips, and an anti-kickback design, this is your go-to set for safely and efficiently creating dadoes and grooves spanning 1/4 to 13/16 inch. This versatile kit cuts a wide range of materials from hardwood to laminate.
$149.99 Regular Choose Options OUT OF STOCK

Freud Industrial Combination Saw Blade 10"x 5/8" 50T

M6086430 Available: 2
In many woodworking shops, one saw must serve multiple purposes such as rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. This 10" combination carbide-tipped blade meets the challenge. The blade's groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting, plus a large gullet for effective chip clearance. The blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers.
$64.99 Regular Choose Options OUT OF STOCK

Freud Industrial Combination Saw Blade 10"x 5/8" 24T

M6086435 Available: 2
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a in glue line in precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4 In. to 2-3/4 In. thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.
$63.99 Regular Choose Options OUT OF STOCK

 Carbide-Tipped Reciprocating Saw Blade 6" 6TPI

M6092240 Available: 4
TiCo hi density carbide teeth used for straighter cuts with less vibration in nail embedded wood. Perma-shield non-stick coating protects from corrosion while reducing friction and heat, exclusive tooth geometry for faster cuts and extreme durability, demolition body.
$8.99 Regular Choose Options OUT OF STOCK

 Carbide-Tipped Reciprocating Saw Blade 12" 6TPI

M6092242 Available: 4
TiCo hi density carbide teeth used for straighter cuts with less vibration in nail embedded wood. Perma-shield non-stick coating protects from corrosion while reducing friction and heat, exclusive tooth geometry for faster cuts and extreme durability, demolition body.
$14.99 Regular Choose Options OUT OF STOCK

Circular Saw Blade 10" 80T

M6097745 Available: 2
Thin kerf, .116", circular saw blade is designed to give glass-smooth finishes when crosscutting hard and soft woods. Alternate top bevel, 7,000 maximum rpm, .098 plate, +10 degree hook.
$89.99 Regular Choose Options OUT OF STOCK

Freud ATB Thin Kerf Miter Saw Blade 10" 60T

M6097755 Available: 2
This 10", thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5A? negative hook angle helps prevent the blade from being too aggressive and pushes the workpiece down and towards the fence. The .090 thin kerf blade removes less material than standard carbide blades, and thus requires less horsepower to produce equally good results. 5/8" arbor
$79.99 Regular Choose Options OUT OF STOCK

Freud Hand Rail Bit 1" Radius 99-444

M6097804 Available: 1
Unsurpassed for creating custom banisters and handrails, Freud's Handrail Bits cut all composition materials, as well as plywood, hardwood, and soft wood. Used with automatic routers and hand-held or table-mounted portable machines, these bits feature a computer-balanced, anti-kickback design for smooth cuts, every time. And, precision-grinding means ultra-clean cuts with no unsightly fuzz. Freud's Hand Rail bits can be combined with Freud's 99-450 or 99-452 profile bits to make complete, stylish rails
$79.99 Regular Choose Options OUT OF STOCK

Freud Forstner Carb Bit FC-001 1/4"

M6098050 Available: 2
Freud's Carbide Forstner Bits bring a technical level of excellence not found in a standard high speed steel Forstner Bit. These bits will drill through a multitude of materials. Use to drill pocket holes, angled holes, overlapping holes and flat bottom holes. Best of all, these bits will not burn like a standard forstner and will stay sharp many times longer. These bits can be sharpened by any reputable sharpening service who sharpens router bits.
$23.99 Regular Choose Options OUT OF STOCK

Freud Forstner Carb Bit FC-002 3/8"

M6098052 Available: 2
Freud's Carbide Forstner Bits bring a technical level of excellence not found in a standard high speed steel Forstner Bit. These bits will drill through a multitude of materials. Use to drill pocket holes, angled holes, overlapping holes and flat bottom holes. Best of all, these bits will not burn like a standard forstner and will stay sharp many times longer. These bits can be sharpened by any reputable sharpening service who sharpens router bits.
Drills all composition materials, plywoods, hardwoods, solid surface materials, and softwoods. Use in hand held drills and drill presses.
$24.99 Regular Choose Options OUT OF STOCK

Freud Forstner Carb Bit FC-003 1/2"

M6098054 Available: 2
Freud's Carbide Forstner Bits bring a technical level of excellence not found in a standard high speed steel Forstner Bit. These bits will drill through a multitude of materials. Use to drill pocket holes, angled holes, overlapping holes and flat bottom holes. Best of all, these bits will not burn like a standard forstner and will stay sharp many times longer. These bits can be sharpened by any reputable sharpening service who sharpens router bits.
$27.99 Regular Choose Options OUT OF STOCK

Freud Forstner Bit Carbon FC-005 3/4"

M6098058 Available: 2
Freud's Carbide Forstner Bits drill clean holes in wood and most wood products. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes.
$29.99 Regular Choose Options OUT OF STOCK